Results 1 to 5 of 5
  1. #1
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524

    New must have item for any high speed FZR/S or VXR/s

    These will replace your stock flimsy pieces that are prone to stripping out bolt threads. I would not trust the stock pot metal pieces to hold your grate in place on skis going 80+ mph.


    These are available for immediate shipping

    http://www.4-tecperformance.com/inde...oducts_id=2033




  2. #2

  3. #3
    gordon lasiter #328's Avatar
    Join Date
    Aug 2008
    Location
    katy, texas , United States
    Posts
    1,647
    +1
    28
    Is riva going to ever make these for the FX~SHO?

  4. #4
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    Quote Originally Posted by gordon lasiter #328 View Post
    Is riva going to ever make these for the FX~SHO?
    why wait make your own, i did and there solid,had them fittied on the Gpr's as well and set with a little 4200fc
    I have my sho one's over a tunnel reinforcment so square stock bar works,grind the hex's down a little if not going over a skin

  5. #5
    FZS Monty's Avatar
    Join Date
    Apr 2011
    Location
    Eastern Long Island, NY
    Posts
    588
    +1
    37
    Quote Originally Posted by Green Hulk View Post
    These will replace your stock flimsy pieces that are prone to stripping out bolt threads. I would not trust the stock pot metal pieces to hold your grate in place on skis going 80+ mph.


    These are available for immediate shipping

    http://www.4-tecperformance.com/inde...oducts_id=2033


    will these come with new bolts?

    do we use same torque on bolts as stock?

    Thanks Jerry, after i installed your rideplate billet inserts i was wondering about the intake grate, and here you go! ordering today.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Must Have Mods for FZR
    By Braves Kerlchen in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 09-27-2013, 05:07 AM
  2. None stage .. High Speed... FZR at 72.3
    By abracadrabron in forum Yamaha PWC Performance (4-stroke)
    Replies: 24
    Last Post: 07-22-2011, 09:05 PM
  3. Distance for Achieving Top Speed? (FZR/SHO)
    By smbstyle in forum Yamaha PWC Performance (4-stroke)
    Replies: 21
    Last Post: 12-06-2009, 09:30 PM
  4. Must have MODS for the 250X!?!?!?!?!?
    By Dankaw250x in forum Kawasaki PWC Performance (4-stroke)
    Replies: 4
    Last Post: 04-01-2008, 12:19 AM
  5. WTB: High Speed T-handles for 951 Carbs
    By carbuff91 in forum 2-Stroke Performance
    Replies: 3
    Last Post: 04-11-2007, 07:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •