Thread: Bad Attitude
05-20-2012, 10:12 AM #1
right before i sold it,new reg #'s and fresh buff to the paint.man it REALLY looked good.
Last edited by TxPro1200; 06-21-2012 at 09:43 PM.
05-21-2012, 08:14 AM #2
dual fuel pickup made from standard pickup and twin fuel water seperators.42mm keihin race carbs,ported intake,carbon tech petals on stock cages with reed stuffers.92 domes cut for squish and port matched cylinders to pipe adapters.factory pipe triple pipes with a pro785 water box with 3" inlet.finger throttle.limited watcon curved cdi.
Last edited by TxPro1200; 06-21-2012 at 09:35 PM.
06-21-2012, 09:26 PM #3
hot seat ride plate,trim tabs,sponsons.8 vane stator w/17-22 skat,custom 22 3/8" drive shaft with straight cut splines on pto end,3 wedge,aat,hurricane nozzle,hardened stub shaft,
06-21-2012, 09:52 PM #4
cowl induction setup,slx hood cowl made functional with added air inlet thru the front storage tray
06-21-2012, 10:00 PM #5
06-21-2012, 10:01 PM #6
06-22-2012, 07:49 AM #7
about 3/4" longer than any other polaris nozzle,never had the time going around bouys to use the nozzle trim and didn't want a drop nozzle setup as i would go between pump setups,lake or closed course.8 vane,17-22 skat prop,aat,3 or 4 wedge,hot seat sponsons,modded 750 grate.river setup 6 vane,nu-jet 7.0,6 wedge,stock sponsons,650 grate.
06-22-2012, 09:16 AM #8
- Join Date
- Sep 2006
Nice looking craft! What did you like about running trim tabs and was there anything you didn't like about them.
06-22-2012, 09:23 AM #9
wished they were on a cable operation.with the 8 vane stuff,3 wedge and trim tabs flat,and the rad flywheel,it had the most incredible launch,just about all you could do to hang on,but about 30 mph you'd want the trim tabs to let the nose come up some.that would have been the most wanted thing left to do.just thinking about that ski always puts a smile on my face.boat ramp launch fee $10,10 gallons of 93 octane $35.00,riding the pro to the point of complete exhaustion...priceless
07-01-2012, 03:06 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)