05-22-2012, 12:10 AM #1
Seadoo nothing happens when i hook up tether/rip cord
OK I HAVE A 1997 SEADOO GTI WHEN I HOOK UP THE TETHER/RIP CORD NOTHING AT ALL HAPPENS JUST PUT A BRAND NEW BATTERY IN IT IT HAS OIL AND GAS FOR THE SENSORS IT SAT FOR A FEW YEARS BECAUSE THE MOTOR WAS BLOWN I BOUGHT IT OFF A GUY A FEW HOUSES DOWN AND SENT MOTOR OUT AND GOT REBUILT HE SAID IT RAN FINE TILL IT BLEW NO PROBLEMS LIKE THIS, IF I JUMP THE STARTER SOLENOID IT WILL CRANK GOOD AND STRONG BUT NO SPARK ALLMOST LIKE ITS NOT PICKING UP THE TETHER/RIP CORD IT IS DESS I HAVE 2 OF THE TETHERS AND THEY TEST OK WITH A MULTI METER THE BEEPER/BUZZER IS JUNK I FIGURED THAT OUT SO I ORDERED A NEW ON THE GUY SAID IT WENT OUT AWHILE BEFORE IT BLEW UP SO IT STILL CRANKED AND RAN FOR HIM WITH A BAD BUZZER... ALL FUSES ARE GOOD ALSO. TELL ME WHAT U GUYS THINK THANKS!!!
05-22-2012, 07:03 PM #2
05-23-2012, 12:13 AM #3
OK, SWEET!!! i found it out tonight the last owner must have been messing around in the electrical box in the back, what it was, was the jumper fuse for the computer was on the wrong side of the starter relay it was on the cold side and needed to be on the hot side to keep light power to the the computer so there for it had no power to recognize the DESS
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)