Page 1 of 12 1 2 3 11 ... LastLast
Results 1 to 10 of 118
  1. #1
    Chris crisistc's Avatar
    Join Date
    Jul 2009
    Location
    Savannah, GA
    Posts
    295
    +1
    4

    Angry How many ideas can we come up with?

    How many ideas can we come up with as to where the oil could be leaking enough that 3 qts would be in the bottom of the hull in 1hr of running....

    2007 Seadoo RXT

    Updated list includes all ideas so far.
    1. Oil Cap
    2. PTO Housing
    3. Oil pressure sensor under intake manifold
    4. Bearing/Boot misaligned or loose
    5. Loose cap bolt underneath block
    6. Oil Cooler
    7. PTO Bearing in Bellow
    8. PTO Bellow not sealing to PTO Housing
    9. Dip stick o-rings
    10. Front Oil pump housing
    11. Starter motor o-rings
    Last edited by crisistc; 06-20-2012 at 06:38 PM.


  2. #2
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by crisistc View Post
    How many ideas can we come up with as to where the oil could be leaking enough that 3 qts would be in the bottom of the hull in 1hr of running....

    2007 Seadoo RXT

    1. Oil Cap
    2. PTO Housing
    3.
    4.
    5.
    6.
    7.

    3. Bearing/Boot misaligned or loose...
    4. Loose cap bolt underneath block...
    5. Your back door after visiting the Blue Oyster Bar...

  3. #3
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Oil pressure sensor under intake mani.

  4. #4
    Chris crisistc's Avatar
    Join Date
    Jul 2009
    Location
    Savannah, GA
    Posts
    295
    +1
    4
    LOL whats this shit? ha

    Your back door after visiting the Blue Oyster Bar...

  5. #5
    ADAMBOMB's Avatar
    Join Date
    Mar 2006
    Location
    Sunrise,Florida
    Posts
    4,723
    +1
    196
    Quote Originally Posted by crisistc View Post
    LOL whats this shit? ha

    Your back door after visiting the Blue Oyster Bar...
    Bend over and shodude will show you

  6. #6
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by crisistc View Post
    LOL whats this shit? ha

    Your back door after visiting the Blue Oyster Bar...



  7. #7
    wotxxxsd's Avatar
    Join Date
    May 2012
    Location
    Orlando
    Posts
    3,928
    +1
    472
    Oil pressure sensor.
    I've had it happen on 2 skis.

  8. #8
    SPEED COMES 1/10 @ A TIME SpeedFreeks Racing's Avatar
    Join Date
    Jun 2007
    Location
    BROOKLYN N.Y.
    Posts
    407
    +1
    1

    oil leak

    i have changed 2 oil coolers that were leaking from the seam on the out side. the oil only leaked at high rpm from maybe 7800 to 8000 and came out real fast. it can also be your PTO bellow bearing as'well..... that can also leak from 2 different places one is the seal inside the bearing it self and the other is around the outer race of the bearing where the clamp grabs the rubber bellows..... i have seen this about 20 -25 times.

  9. #9
    Chris crisistc's Avatar
    Join Date
    Jul 2009
    Location
    Savannah, GA
    Posts
    295
    +1
    4
    Quote Originally Posted by Danny View Post
    Ha Ha I've never seen that before but it was funny. Ha



    How many ideas can we come up with as to where the oil could be leaking enough that 3 qts would be in the bottom of the hull in 1hr of running....

    2007 Seadoo RXT

    1. Oil Cap
    2. PTO Housing
    3. Oil pressure sensor under intake manifold
    4. Bearing/Boot misaligned or loose
    5. Loose cap bolt underneath block
    6. PTO bellow bearing
    7.

  10. #10
    Chris crisistc's Avatar
    Join Date
    Jul 2009
    Location
    Savannah, GA
    Posts
    295
    +1
    4
    Quote Originally Posted by SpeedFreeks Racing View Post
    i have changed 2 oil coolers that were leaking from the seam on the out side. the oil only leaked at high rpm from maybe 7800 to 8000 and came out real fast. it can also be your PTO bellow bearing as'well..... that can also leak from 2 different places one is the seal inside the bearing it self and the other is around the outer race of the bearing where the clamp grabs the rubber bellows..... i have seen this about 20 -25 times.

    What is the oil cooler? I'm Not familiar


    AHH never mind I think I know now.

Page 1 of 12 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How many tubes can you tow with a supercharged 4-tec?
    By Lstorm2003 in forum 4-Tec Performance
    Replies: 14
    Last Post: 08-07-2016, 09:26 PM
  2. How many hours can we expect the 215 to go? Implant project
    By markh2000 in forum Sea Doo Sport Boats
    Replies: 1
    Last Post: 05-12-2012, 01:58 PM
  3. How many hours can a ski get it on it before it's time to freshen it up?
    By DANSBIRD in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 06-19-2011, 12:33 PM
  4. how many miles can a full tank gas go with the slx780 95'?
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-14-2010, 05:55 PM
  5. How many RPM's are you down with hot weather!
    By WATER WOODY in forum Yamaha PWC Performance (2-stroke)
    Replies: 21
    Last Post: 08-24-2006, 03:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •