Results 1 to 6 of 6
  1. #1

    How to remove the Extension, Pump part #5131196????

    The extention is frozen to the pump housing. I have tried everything, muriatic acid to remove the salt, soaking it in rust breaker fluid, it will not budge.

    Anybody have a solution to get it off?

    Click image for larger version. 

Name:	pump.jpg 
Views:	115 
Size:	122.0 KB 
ID:	272486

    HELP


  2. #2
    Polarisitis loonatik's Avatar
    Join Date
    May 2010
    Location
    Tampa, FL
    Posts
    812
    +1
    10
    Tap around the mating seam with a small hammer then use "persuasion power" of a big rubber mallet to get it rock side to side.

  3. #3
    I heated it up and used an air hammer. Came right off.

  4. #4
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    I use a 2lb dead blow to take that stuff apart.

  5. #5
    ripcuda's Avatar
    Join Date
    May 2010
    Location
    Newman Lake, WA
    Posts
    2,389
    +1
    166
    Is the pump base (and stuck wear ring) still attached to the hull? If so, leverage with long 2x4... gently prying on each side to pop off wear ring.

    If off the ski... put pump base on solid piece of wood... and big rubber mallet blows on wear ring... as you rotate it. Heat would be a option too on the wear ring.

    Good luck.

  6. #6
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,599
    +1
    1,276
    See the jet pump section from my signature links for a video showing one method of getting the sections to divorce.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 40
    Last Post: 06-09-2016, 06:46 AM
  2. How I remove the Jet Pump for inspection on a Ultra 300/310 by Rod Part 1
    By rod_rod in forum Kawasaki PWC Performance (4-stroke)
    Replies: 40
    Last Post: 06-09-2016, 06:46 AM
  3. How to remove the Shaft out of the Pump ???
    By RXP-X 2011 in forum Sea Doo Spark
    Replies: 5
    Last Post: 07-31-2015, 06:00 AM
  4. How to Remove the Throttle Body
    By johnD in forum 4-Tec Performance
    Replies: 11
    Last Post: 04-21-2007, 11:39 AM
  5. How-To: Removing the engine cowling.
    By MikeTrin in forum Sea Doo How To & FAQs
    Replies: 8
    Last Post: 06-23-2005, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •