Thread: Disconnecting Oil Pump????
05-25-2012, 10:45 PM #1
Disconnecting Oil Pump????
Have a 2000 GPR 1200 and would like to switch to premix. Can I just disconnect the oil pump cable from the pulley and switch to premix? Have the block off plate, but don't feel like pulling the pipe off right now. Looks like a pain to pull the pipe from what I can see....
05-26-2012, 03:15 AM #2
- Join Date
- Jul 2010
Disconnecting the oil pump cable is going Drive the pump into gong more oil, it is the fail safe design of the pump. You need to remove the pump to go premix.
05-26-2012, 10:11 AM #3
Ok. How hard is it to pull the pipe? Has anyone done a write up on how exactly to do it? Thx
05-26-2012, 10:18 AM #4
there was until cajun dudes site went down
05-26-2012, 10:19 AM #5
Are their any non reusable gaskets to take off the pipe that is above the oil pump?
05-26-2012, 05:06 PM #6
- Join Date
- Jul 2008
- Chesterfield Virginia USA ~ On the James River~
05-26-2012, 06:48 PM #7
05-26-2012, 06:49 PM #8
05-26-2012, 08:47 PM #9
Great info ion that site. If I premix yamalube 2s will 40:1 be ample for a stock motor? Thx again for all the help.... 8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)