Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843

    I/C Hull thru Exst. question

    Does the VTS have to come out completley? also did anyone have to trim or cut away there styrofoam in the rear of the ski because the rear exst was hitting it ? Id like to talk to someone that just did these two installs VIA phone if anyone can talk that just did this please let me know


  2. #2

    Join Date
    Apr 2006
    Location
    Santa Monica
    Posts
    45
    You might want to read the install instructions from Riva's site.

  3. #3
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    Umm I would not have posted this If I didnt already do that .. thanks for that insight tho ..

  4. #4
    mxl16's Avatar
    Join Date
    May 2005
    Location
    Central NJ
    Posts
    1,590
    no u dont have to remove the vts. just unbolt the throttle body ,which is only 4 bolts. leave everything else connected to the throttle body and just rotate it up and place it ontop of the engine out of the way. you now have room to remove the resonator. it takes a few minutes and some figuring out, but it will come out.

    and yes i did take all of the styrafoam out, you might need to remove the waterbox if you want it out in one piece.

  5. #5
    i couldn't get my resonator up through the TB location maybe i couldn't get it twisted just right but i tried, 4 me i found it a lot easier 2 remove the vts

  6. #6
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    My res. Is already out , I was asking about the I/C for the vts ... Thank u for the info on the styrofoam .. the instructions dont touch on that ..also the instructions show a picture of something with 4 holes in it to block off the stock hole.. however there is nothing with 4 holes

  7. #7
    KiwiRXP's Avatar
    Join Date
    Dec 2006
    Location
    Auckland, New Zealand
    Posts
    129
    That plug with the four holes in it is to block the stock exhaust hole once the stock outlet is removed. The four holes are for tool to fit in to stop the plug spining.

  8. #8
    mxl16's Avatar
    Join Date
    May 2005
    Location
    Central NJ
    Posts
    1,590
    Quote Originally Posted by KiwiRXP View Post
    That plug with the four holes in it is to block the stock exhaust hole once the stock outlet is removed. The four holes are for tool to fit in to stop the plug spining.
    that must be for 04's? my 05 has little tabs things inside the hull to keep i from spinning while trying to tighten the nut down.

  9. #9
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    I have an 04 and I dont have any plug with 4 holes in it ... ?

  10. #10
    KiwiRXP's Avatar
    Join Date
    Dec 2006
    Location
    Auckland, New Zealand
    Posts
    129
    Quote Originally Posted by CRAZEDRXP View Post
    My res. Is already out , I was asking about the I/C for the vts ... Thank u for the info on the styrofoam .. the instructions dont touch on that ..also the instructions show a picture of something with 4 holes in it to block off the stock hole.. however there is nothing with 4 holes

    Sorry I misunderstood your post. With the RIVA kit they supply that plug with the four holes.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 5
    Last Post: 07-13-2012, 04:49 PM
  2. Thru hull exhaust parts question
    By LSXHP in forum 4-Tec Performance
    Replies: 10
    Last Post: 05-30-2012, 03:46 PM
  3. Riva Thru Hull Rear Exhaust Question.
    By tsho in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 11-24-2009, 04:45 PM
  4. Hull Flooding Leak question
    By Red08Ultra250 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 12-29-2008, 10:39 PM
  5. 04 RXP - Leak into Hull thru VTS
    By joeg in forum 4-Tec Performance
    Replies: 7
    Last Post: 07-01-2005, 02:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •