Results 1 to 7 of 7
  1. #1

    Waverunner 3 carb parts

    We leave the WR3 at the lake and someone apparently borrowed the high speed jet and didn't return it.
    Can one of you point me to a place where I can pick up the jet,spring,washer & o-ring?

    thx


  2. #2
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    are you talking about the needle adjuster on the outside of the carb? the jets are internal.
    is it the high speed or low speed adjuster? to tell the difference the high speed adjuster sits higer on the carb and usually has a little black cap on it and needs a screwdriver to adjust.
    The lows sit closer to the manifold and have a T-handle to adjust them.
    I have all the needed pieces, just need to know which you are missing.
    sometimes these get corroded and the spring is frozen so it does not hold pressure like it should, and as a result these can vibrate out. you may want to check in your bilge as well. I always apply a liberal dose of grease around these as a seal to keep them from corroding.
    Bill

  3. #3
    Sorry, yes it's the needle adjuster, high speed. I've gone all through the bilge with no luck.........other than a bolt that I can't find a home for.

    thx

  4. #4
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    I have everything how does $12 shipped sound? USPS priority

  5. #5
    $12 sounds great, if I hadn't already sourced it locally.

    I'll know to check with you first next time Bill.

    thanks

  6. #6
    I also need to buy the fuel jets (inside) as well as the needle adjusters, springs etc on the outside. Plan on replacing all of them for my GPR1200. I can order them out of PWC superstore website but wanted to check on the sizes i need for the high/low jets etc. I was able to get my old carbs back and have successfully been able to take a screw extractor to remove everything that was seized and now have to drill out the fuel adjuster b/c it was stuck and then I stripped it. Anyone have any info on the size? Thanks

  7. #7
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    SBT will be able to answer all those questions
    Quote Originally Posted by DEROBE16 View Post
    I also need to buy the fuel jets (inside) as well as the needle adjusters, springs etc on the outside. Plan on replacing all of them for my GPR1200. I can order them out of PWC superstore website but wanted to check on the sizes i need for the high/low jets etc. I was able to get my old carbs back and have successfully been able to take a screw extractor to remove everything that was seized and now have to drill out the fuel adjuster b/c it was stuck and then I stripped it. Anyone have any info on the size? Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. gp1200 carb parts needed!!
    By SvrdRam in forum Yamaha Classifieds
    Replies: 40
    Last Post: 04-20-2009, 08:55 PM
  2. 90 Waverunner III carb spring and HELP
    By bobj in forum Yamaha Old School Skis
    Replies: 0
    Last Post: 07-22-2008, 10:40 PM
  3. gp1200r parts, oem head, i-shaft, carb parts
    By wademcgee in forum Yamaha Classifieds
    Replies: 17
    Last Post: 06-24-2008, 08:15 PM
  4. 650 waverunner wavejammer engine parts
    By FLjoyrider in forum Yamaha Classifieds
    Replies: 1
    Last Post: 06-06-2008, 05:31 PM
  5. Where to get Mikuni carb parts
    By allcool in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-20-2007, 09:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •