Results 1 to 6 of 6
  1. #1

    Please make prop recommendations - 2005 RXT w/X-charger

    I was in need of a prop before I put the X-Charger on. It was in pretty rough shape and I don't think a stock pitch prop is the ideal setup. I have not yet run wide open very long as I only have 8 hours on my rebuild. I have no problem spinning to 8200 rpm out of the hole.

    Currently I am stock except the XCharger. Next step will be to fill the ride plate. Probably then a pump wedge. I will probably add a 3 or 4" Kanaflex (or some other way to get more air in) and at that time will upgrade the injectors to 42#. I don't anticipate going beyond that, so I am looking for the best prop given where I am at and where I am going. It seems most setups in the forum that have an XCharger go beyond where I plan to stop my mods and therefore I am not finding a clear cut "best' prop.

    I am thinking a Sola Concord but open to recommendations. Will I spin a 14/19 effectively?

    Thanks,
    Greg


  2. #2
    boost junkie skidoochris's Avatar
    Join Date
    Mar 2012
    Location
    Davison, Mi
    Posts
    4,494
    +1
    476
    why do you think the fuel upgrade is no big deal?

  3. #3
    Quote Originally Posted by skidoochris View Post
    why do you think the fuel upgrade is no big deal?
    Cite me a case where 38# injectors and an XChrager on an otherwise stock machine has caused a lean condition that burned a piston or other damage for that matter.

    Based on my research 38# injectors are perfectly fine for a XCharger only upgrade and I have no concerns. If I burn it down I PROMISE I will come back and say I made a mistake so no one else makes the same. I am willing to accept the risks.

    I do however appreciate your concern and I will be upgrading my injectors soon enough purely as a natural progression. However, keeping my RPMs in check is a higher priority to me than more fuel.

    Thanks,
    Greg

  4. #4
    SingTH's Avatar
    Join Date
    Jun 2010
    Location
    Thailand
    Posts
    476
    +1
    9
    I'm used Solas 14/19R with nozzle 82 mm.RIVA ECU/Injector 50 lbs, top speed approx 8450-8520 RPM.

  5. #5
    Quote Originally Posted by SingTH View Post
    I'm used Solas 14/19R with nozzle 82 mm.RIVA ECU/Injector 50 lbs, top speed approx 8450-8520 RPM.
    Your setup is quite a bit further than where I intend to go. So does that mean I will not be able to pull a 14/19R?

  6. #6
    Did some more searching and I think I can pull a 14/19 - someone talk me out of it if I am making a mistake.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wiring help please, got 4 connectors unsure of 2005 rxt harness
    By Avi8tor in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 08-08-2012, 07:02 AM
  2. Replies: 5
    Last Post: 08-29-2011, 11:15 PM
  3. 2005 RXT 215 - Modification Advice Please
    By RXTRider in forum 4-Tec Performance
    Replies: 79
    Last Post: 09-14-2010, 05:58 PM
  4. best prop for 2005 rxt??
    By wavehummer in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-20-2008, 08:21 PM
  5. 2005 RXT in Florida **Help Please **
    By rev114 in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-19-2008, 09:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •