Results 1 to 5 of 5
  1. #1

    Join Date
    Jun 2012
    Location
    South Carolina
    Posts
    29

    2 jet ski's 2 problems HELP PLEASE

    I have 2 jet 150 turbo's today i checked the waste gates. They have a bit of resistance but they did move and spring back to place.

    Black jet ski I took it to the lake today only the 2nd time iv been on them. Just bought them a last week. Today started right up. I putted around slow for about 8 mins to let it warm up. Then half throttle for a few mins. Still no check engine light or anything. Running fine.
    so once i figured its warm enough i hit the gas. SKi stands up taking off them VMMMMM it slows back down to 4800rpm check engine and red light is on. Turn it off for a few seconds check engine light is off. Coast around for a few mins. Then i try to take off VMMMMM same thing back to 4800rpm. This time i heard the waste gate releasing pressure. So i turned it off again and repeated the above this time paying more attention to the Turbo bar. When i hit the throttle the turbo was going straight to max seemed to be over boosting. So i turned it off once again this time i watched the turbo bar i didnt just hit the gas i made sure the turbo was not going to max and it worked great up to 7000 rpm no problem. made a few short laps around the dock like this. Then VMMMMM now cant go over 1800 rpm WTH now check engine light on again. turned it off and stated to move a bit and once again back to 1800rpm. so i took it in for the day. The problem is i rode this jet ski about 4 days ago and it ran fine no problems at all. Now i bought it i have problems

    OK if your still with me I like to ask about my red one. The air/oil separator is leaking out out the hole thats in it. I know the oil is post to go out the bottom back to the engine sump but doesn't seem to be working that great. Im not sure if the engine has ever been over filled just got it a few days ago. Yes after you ride it for a bit and go to about idle it smokes pretty bad. I pulled the line between the turbo and the air box it had some oil in there. Is the oil sump post to be sucking the oil from the air/oil separator???? is there a way to test it?? can the separators go bad? other then smoke it runs fine. no stalling, no cut backs, just fine. today all i could get it up to was 6900rpms


    What RPM's should we be running at at WOT???

    whats your opinion on the oil/ring release you pour on the pistons to let it soak over night to help loosen the rings ??



    What all do i need to clean if the ski was over filled with oil?

    Thanks for all input and spending the time reading this. I know its alot Im just desperate right now as i want to ride my new toys


  2. #2

    Join Date
    Jun 2012
    Location
    Willis, Texas
    Posts
    16
    A lot to clean. You need to clean the MAP sensors two of them, I used hydrogen peroxide.
    The temp sensors could go bad too so clean them. It doesn't sound like the turbo is hurt just make sure the gate valve is free. Its not really easy to move but smooth.
    spray it with lube. If your sure its not over heating you can disconnect the one behind the gate valve it'll let it rev. Mine revs to 7350.
    When you take the intake at the throttle body off you'll see a mixture of water and oil. You may have to clean the intercooler.
    These machines kick ass.

  3. #3

    Join Date
    Jun 2012
    Location
    South Carolina
    Posts
    29
    Thanks done all this. Im still trying to figure out where the oil is coming from. Its not over filled with oil. I am getting oil spraying out the little hole on the air/oil separator. Why is this? where could the oil be coming from ?

  4. #4
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,587
    +1
    1,272
    Quote Originally Posted by rjjet View Post
    Thanks done all this. Im still trying to figure out where the oil is coming from. Its not over filled with oil. I am getting oil spraying out the little hole on the air/oil separator. Why is this? where could the oil be coming from ?
    Do you know about the oil level dipstick markings being misleading?

  5. #5

    Join Date
    Jun 2012
    Location
    South Carolina
    Posts
    29
    Yes im pretty sure oil level is fine

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DESS PROBLEM. Help please!!!!!
    By marvin1907 in forum 2-Stroke Performance
    Replies: 9
    Last Post: 06-24-2009, 09:21 PM
  2. SLT 780 Starting problem! Help Please!
    By wjstewart in forum Polaris Open Discussion
    Replies: 22
    Last Post: 05-21-2009, 08:32 PM
  3. gp1300r starting problem (help please)
    By Markb47 in forum Yamaha How To & FAQs
    Replies: 8
    Last Post: 06-26-2008, 05:05 PM
  4. 01 gtx di problems help please
    By baba850r in forum 2-Stroke Performance
    Replies: 1
    Last Post: 06-25-2008, 04:36 AM
  5. problem help please put hole in hull
    By mikegpr03 in forum Yamaha How To & FAQs
    Replies: 1
    Last Post: 12-31-2006, 12:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •