Results 1 to 6 of 6
  1. #1

    Aftermarket handle bars-disabling q.s.t.s.?

    Hey everyone I got a set of blowsion aftermarket bars with real nice grips from my buddy. It looks like the trim system grip is not going to fit anymore. If I disable it, how do I keep the nozzle in a fixed position? Should I even think about disable or try to make it work with the new bars?


  2. #2
    you can drill the handle bars for it to work. If its not attached itll stay in neutral position, or you can also buy a manual lever to do one way, for like the manual drop nozzle's which is what i have now, i rarely use the nozzle in the downward position so i have mine setup to lift the nozzle when you squeeze it and when you let go, it goes back to neutral from the thrust of the water leaving the exit nozzle, on land itll stay in the upward position.

  3. #3
    So if I remove the 2 cables, the nozzle will hold itself in,the nuetral position?

  4. #4

    Join Date
    Jul 2010
    Location
    MIAMI, FL
    Posts
    411
    +1
    1
    It's pretty easy to get the qsts to work with aftermarket bars.

  5. #5

    Join Date
    Jul 2010
    Location
    MIAMI, FL
    Posts
    411
    +1
    1
    Just drill one hole and your done.

  6. #6
    yes it will stay in position, it may flap around out of water but in water the exit nozzle is "neutral" which will keep the steering nozzle neutral when water is shooting out of it..it needs force to move it up and down

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. aftermarket handle bars on stock steerin system
    By jbuhles in forum 2-Stroke Performance
    Replies: 9
    Last Post: 04-16-2011, 10:43 PM
  2. what is the benefit of aftermarket handle bars?
    By noshowallgo in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 09-18-2008, 12:41 AM
  3. Finger throttle and aftermarket Handle bars (96 xp)
    By 240witSR in forum 2-Stroke Performance
    Replies: 8
    Last Post: 05-15-2008, 03:12 PM
  4. Covers for Aftermarket Handle Bars
    By Chrisrokc in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 10-09-2007, 09:08 PM
  5. Aftermarket Handle Bars
    By Chrisrokc in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 03-07-2007, 04:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •