Thread: iS/aS SCOM RPM
06-16-2012, 01:20 PM #1
iS/aS SCOM RPM
OK... for those people who actually run the Riva Speed Control Override Module, or those who have installed them for friends/customers, I could use your opinion. I installed a Riva SCOM on two 2011 skis, an iS and aS. Both skis see 8040 rpm with occasional flashes of 8060. Air temp was on the warm side, 93 degrees. I also installed Impros 15/20R impellers. Who would leave the impellers as they are, and who would tweek them 1 mm?
06-16-2012, 06:53 PM #2
Read post # 9 here: http://www.greenhulk.net/forums/show...81#post1899181
Your current impeller pitch is up against the 8040 rpm limit, add more pitch to get rpm around 8000, you might gain 1 mph!
IMO, I would leave it alone until you are ready for the re-flash and everything else that goes with it.
06-16-2012, 09:19 PM #3
06-17-2012, 05:03 AM #4
- Join Date
- Aug 2010
06-17-2012, 12:12 PM #5
The two riders (father and son) reported 70-71 consistantly and one ski hit 72 once.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)