Thread: Round MFD not waking up..
06-20-2012, 03:04 PM #1
Round MFD not waking up..
I had the LoPr error on my MFD, so I disconnected the MFD and charged the battery. The battery is now fully charged, and I reconnected the MFD, but now the MFD is not even working?
Any help or tests would be appreciated!
06-20-2012, 03:17 PM #2
- Join Date
- Jul 2007
- near Toronto, Canada
Does the LCD display appear at all?
If not, check the fuse for the display. Fuse is inside the electrical box.
Details on how to test and replace the MFD fuse can be found in the MFD section of my signature links.
06-20-2012, 03:52 PM #3
No it does not, but it was just a week or so ago..
I checked the fuse, and the line in between connecting the ends seem good. To be sure here is a picture.
Also, I noticed a tan wire that wasn't attached to anything?-----After further investigation, this wire is not tan (saw other tan wires). But it seems to be either brown or orange, although there is only a terminal for brown and white.
06-20-2012, 05:37 PM #4
I tried a test to see if it was a fuse. I connect two wires from the pins (+ and - pins) and connected them to a charged battery.. I got no display, but my MFD was working not to long ago.. Is there anyway I can repair this I guess?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)