Results 1 to 9 of 9
  1. #1

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10

    '01 GP1200R part out (1512 3mm stroker motor, BlackJack 48s, VForce3s)

    Complete part out of my 2001 GPR...has clear title registered to me. I will send Kevin information for verification.

    1512 STROKER Big Bore motor built by Kevin (WaterWoody) @ West Coast Porting

    Motor is like new!! Very low hours (16.4)!! Pressure tested perfect...9.5psi for 12 minutes.

    Perfect compression – 155psi in all 3 cylinders
    - 3mm stroker crank
    - 89mm wiseco pistons
    - Riva gas valves
    - R&D 175psi heads (race gas)

    $3,200

    Blackjack True 48mm carbs with less than 1 hour runtime (.8hr). I bought these carbs brand new from Art @ Jetworks for $1,425.
    - Restrictors drilled out
    - Carbs are jetted for the 1512 (160 mains / 125 pilots / 2.5 ns / 95g springs / 110 restrictor main jet...fuel pressure was 5.5 lbs.)

    $1,250 for the bj 48s, 2 external fuel pumps, ported Protec manifold & Prok F/As

    VForce3s w/ spacer plate, bolts & Lowell's reusable gaskets – These are the special 3 petal reeds that WFO uses. Reeds are in perfect shape with only 10 hrs.! I also have a brand new set of reeds that are included. $600

    VX 15/22 prop in perfect shape! Less than 5 hrs. of usage. Prop tool included. $250

    *SOLD*Complete set of Speedwerx GPR triple pipes that have been pressure tested - $500

    HO pump - $275

    Very nice aluminum Karavan trailer - no paperwork since SC doesn't require trailers to be registered/titled. $300

    **SOLD**’01 GPR hull in awesome shape w/upgrades (great conversion ski) - Hull only has 70 total hours on it. $1,200

    - Island Racing HD billet aluminum mounts (front intake grate, ride plate, pump shoe)
    - IR tunnel reinforcement kit
    - IR HD driveshaft hose
    - Sealed pump shoe w/ Kerry mod (2 pressure relief holes) and drilled/tapped for larger m8 bolts for rear of intake grate
    - Hull trued in back of ski
    - New HydroTurf mats
    - Stock trim tabs
    - Stock seat with Riva Yamaha cover

    **SOLD** Gauge display - $250

    Prices do not include shipping/paypal fees.

    Located in Chapin, South Carolina.

    Thanks,
    Adam
    Last edited by Screamin'SLX; 08-28-2012 at 07:54 PM.


  2. #2
    Ill take the sealed pumpshoe. PM for price.

  3. #3

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    Quote Originally Posted by Black Z-24 View Post
    Ill take the sealed pumpshoe. PM for price.
    The pump shoe is sealed with 5200 so it stays on the ski..thanks for the interest though.

  4. #4
    Wake junky Gp1200R's Avatar
    Join Date
    May 2010
    Location
    Texas
    Posts
    136
    +1
    2
    Have you sold motor yet??

  5. #5

    Join Date
    Jun 2012
    Location
    Florence, AL
    Posts
    24
    How much for the display gauge?

  6. #6
    id like the hull if ud do 1000

  7. #7

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    Quote Originally Posted by stoneycreek View Post
    id like the hull if ud do 1000
    PM sent.

  8. #8
    Do you still have the hull?

  9. #9
    I need the gauge display asap. Please call me 727 420 5793. Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS '01 GP1200R part out (1512 3mm stroker motor, BlackJack 48s, VForce3s)
    By Screamin'SLX in forum Yamaha 2 Stroke Skis
    Replies: 5
    Last Post: 07-05-2012, 12:09 PM
  2. 2001 Gp1200r Part out!!! Get your parts here!!
    By HallPass in forum Yamaha Classifieds
    Replies: 24
    Last Post: 07-20-2010, 07:45 PM
  3. "SOLD" 2001 GP1200R, Parting out or whole "SOLD"
    By wademcgee in forum Yamaha Classifieds
    Replies: 30
    Last Post: 07-31-2009, 05:33 PM
  4. How much return on a GP1200R part-out?
    By Ziggy in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 07-25-2009, 12:46 AM
  5. 2 01' xl700 part out
    By jalopski in forum Yamaha Classifieds
    Replies: 6
    Last Post: 07-09-2008, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •