Results 1 to 5 of 5
  1. #1

    GTX LTD 2010 going to limp mode after a jump

    and show the folowing fault codes :

    1.p0122
    2.p0222


    those codes refer to the TAS and TPS any ideas ??

    cheers


  2. #2
    ecpChris's Avatar
    Join Date
    Jul 2007
    Location
    ocean county nj
    Posts
    2,912
    +1
    427
    Make sure the Connections at the throttle body are good. I've had a couple connectors (including the CAN) come loose on me in the ocean. It's not fun leaning in your ski with the seat pointing at the sky trying to diagnose an issue, especially getting tossed around by waves.

  3. #3
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    look over the wire connectors and follow the wiring back to look for damage.
    Make sure the connectors are tight and no corrosion inside the pins on the connectors.

  4. #4
    found it it was the CAN conector behaind the cluster it had shitty connection i cleaned it and put some dielectric grease and its all fine !! thanks for the help all !

  5. #5
    Full Throttle or Broke!!! UNSANE's Avatar
    Join Date
    Aug 2008
    Location
    Orlando
    Posts
    721
    +1
    82
    Quote Originally Posted by jake555 View Post
    found it it was the CAN conector behaind the cluster it had shitty connection i cleaned it and put some dielectric grease and its all fine !! thanks for the help all !
    Have the same thing with mine every once in a while. I just raise the deck, remove the front storage and reach in there and give the connector block a squeeze. I can usually feel it click back together and then I'm good. Those connectors on iS skis kind of flop around a bit and are prone to such issues. First I've heard of it on a non suspension ski. Glad you got it figured.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 05 rxp flashing oil and going to limp mode
    By RobBryan in forum 4-Tec Performance
    Replies: 6
    Last Post: 05-16-2016, 09:26 AM
  2. 2002 GTX 4 Tec SeaDoo Limp Mode after 10-15 min
    By Cm1lls in forum 4-Tec Performance
    Replies: 14
    Last Post: 01-17-2014, 09:54 AM
  3. 96 SLTX acts like it is going into limp mode after it warms up
    By Rocko8338 in forum Polaris Open Discussion
    Replies: 34
    Last Post: 06-21-2012, 11:20 PM
  4. will code 15 engine temp sensor mal cause gp1300r to go into limp mode?
    By djpeetur in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 06-01-2010, 11:27 AM
  5. 03 Ultra 150 going to limp mode
    By mikerambot in forum Kawasaki PWC Performance (2-stroke)
    Replies: 7
    Last Post: 06-24-2009, 02:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •