Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790

    "REDUCED"Seadoo RXP converted to a RXP-X Very nice

    Reduced $7450 with galvanized Karavan trailer. Guys this will be the last time I post this ski for sale and then will part it out.

    It is a 2008 RXP-X put into a 2007 RXP hull. The 2008 P-X bucked my friend at 80+ and hit a wall. I bought Johns (9SecZ06) 07 SKi and did the swap.

    The Ski has 117 hours and I still run it so it will vary. It has a Stock 2012 X SCer just install NEW. SO it is ready for a 100hours of fun. This ski has the basic setup and runs 76+ in 95% heat here in texas. at a low RPM as I used it in winter were it would pull the prop to 80+ IN COOLER WEATHER. It turns 8200RPm's at 76 in the heat. SO the prop can be adjusted better for summer if wanted and if I was gonna keep it I would do a SUmmer and winter prop.

    ANyway want $7450 and that is with a Karavan Trailer. It sits on a Black one but I have the same one in galvanized that goes with it as I like the black.
    GUYS please dont be affraid to make me a offer. With or with out trailer. All I can say is no or we can work it out.
    $7450 SKi trailer and theses parts.

    COmplete X ELectronics and all GAs tank, all.

    Riva ECU
    Less Cook Retainers
    Jfizzle IC with RIvas PIpes and IC brackett. James SOLD me the IC seperate with bleed mod.
    Riva Catch can
    R&D 4inch adapter with Kanaflex rear air
    Riva Rectifier brackett
    Rear exhaust kit and remember it is a 08 + Exhaust system.
    Rule 750 Auto bilge
    Jims CLoosed loop Newest plate.
    Rapid Accellerations OPEn loop kit. JD1's Routing
    R&D grate
    SOlas VIrgin 15-20
    RIva VTS rod
    RIva pro BO's
    OFcoarse X Steering with ODI grips
    TOrx racing exhaust spacer
    X cover OEM
    Exhaust manifold tapped for 02 sensor

    I may be missing something but will add it if I remember.

    Pics added and please if interested give me a shout or PM as I need to sell the ski.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_4481.jpg 
Views:	177 
Size:	87.9 KB 
ID:	275811   Click image for larger version. 

Name:	IMG_4482.jpg 
Views:	158 
Size:	101.0 KB 
ID:	275812   Click image for larger version. 

Name:	IMG_4513.jpg 
Views:	174 
Size:	73.2 KB 
ID:	275813   Click image for larger version. 

Name:	IMG_4558.jpg 
Views:	180 
Size:	74.0 KB 
ID:	275814   Click image for larger version. 

Name:	IMG_4549.jpg 
Views:	159 
Size:	54.1 KB 
ID:	275815  
    Last edited by Water4fire; 07-18-2012 at 10:45 PM.


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Additional picsof project
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20120622_194359.jpg 
Views:	131 
Size:	105.9 KB 
ID:	275817   Click image for larger version. 

Name:	20120625_111837.jpg 
Views:	155 
Size:	146.7 KB 
ID:	275819   Click image for larger version. 

Name:	20120622_194702.jpg 
Views:	118 
Size:	118.8 KB 
ID:	275818   Click image for larger version. 

Name:	20120625_111901.jpg 
Views:	150 
Size:	130.5 KB 
ID:	275821   Click image for larger version. 

Name:	20120625_111850.jpg 
Views:	130 
Size:	76.5 KB 
ID:	275820  

  3. #3
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Last ones with VIn and a few things I forgot.

    Tapped for a O2 sensor in the exhaust manifold and it comes with the COver.
    Oh yea a Exhaust SPacer NEW just installed
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20120625_111939.jpg 
Views:	102 
Size:	126.5 KB 
ID:	275825   Click image for larger version. 

Name:	20120625_111923.jpg 
Views:	105 
Size:	140.8 KB 
ID:	275824   Click image for larger version. 

Name:	20120628_210918.jpg 
Views:	101 
Size:	37.8 KB 
ID:	275828   Click image for larger version. 

Name:	IMG_4555.jpg 
Views:	114 
Size:	82.6 KB 
ID:	275822   Click image for larger version. 

Name:	IMG_4563.jpg 
Views:	121 
Size:	95.9 KB 
ID:	275829  

  4. #4

    Join Date
    Jul 2008
    Location
    Long Island
    Posts
    247
    +1
    3
    Nice machine. Wish you werent soo far from NY. Id buy it.

  5. #5
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Quote Originally Posted by ModularJunk View Post
    Nice machine. Wish you werent soo far from NY. Id buy it.
    I bet john at unishippers could have it there cheap.

  6. #6

    Join Date
    Jul 2008
    Location
    Long Island
    Posts
    247
    +1
    3
    I wouldnt buy it wo water testing it. Bought a used ski this past weekend over 2hrs away from me and he lived to far from the water for me to take for a ride. When I got it home and took it for a ride it was fucked up and had to drive back n give him the ski back and get my money back. It ran fine on a hose but as soon as it was in the water is ran like crap and wouldnt go over 5500rpm and broke up n backfired.

  7. #7
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by ModularJunk View Post
    I wouldnt buy it wo water testing it. Bought a used ski this past weekend over 2hrs away from me and he lived to far from the water for me to take for a ride. When I got it home and took it for a ride it was fucked up and had to drive back n give him the ski back and get my money back. It ran fine on a hose but as soon as it was in the water is ran like crap and wouldnt go over 5500rpm and broke up n backfired.
    I highly doubt that would be an issue here. I would not hesitate to by this ski from Austin and have it shipped. if I were in the market.

  8. #8
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Quote Originally Posted by ModularJunk View Post
    I wouldnt buy it wo water testing it. Bought a used ski this past weekend over 2hrs away from me and he lived to far from the water for me to take for a ride. When I got it home and took it for a ride it was fucked up and had to drive back n give him the ski back and get my money back. It ran fine on a hose but as soon as it was in the water is ran like crap and wouldnt go over 5500rpm and broke up n backfired.
    I am not sure why you even posted this on my add. ????

    Ski is still here and I will say this. This ski is what I state and runs perfect. Or ill give money back and come get it at my exspense.

  9. #9

    Join Date
    Jul 2008
    Location
    Long Island
    Posts
    247
    +1
    3
    Quote Originally Posted by Water4fire View Post
    I am not sure why you even posted this on my add. ????

    Ski is still here and I will say this. This ski is what I stat and runs perfect. Or ill give money back and come get it at my exspense.
    I didnt post it to kill your sale. I really like your machine and I was just answering someone elses reply. Good luck on your sale. Very nice machine.

  10. #10
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,059
    +1
    790
    Is anyone interested? At all? I am not useing it because of my current situation and need to sell.

    COME MONDAY IT WILL BE PARTED OUT!

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2004 seadoo rxp convert to 260
    By Levs95 in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-26-2013, 06:49 PM
  2. FS 2007 Seadoo RXP converted to RXP-X
    By RD Trip in forum Sea Doo 4Tec Skis
    Replies: 16
    Last Post: 11-14-2012, 10:06 AM
  3. 04 Seadoo RXP Clicks when trying to start??
    By cfillingi in forum Sea Doo Open Discussion
    Replies: 65
    Last Post: 08-04-2009, 10:23 AM
  4. Seadoo supercharger converted to automotive
    By thompsdw in forum 4-Tec Performance
    Replies: 7
    Last Post: 05-06-2009, 12:28 PM
  5. How to Service a Seadoo (RXP)
    By JordanHaye in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-03-2007, 06:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •