Thread: VTS Extention rod RXP
01-26-2007, 03:12 PM #1
VTS Extention rod RXP
What is the best way to set this up ? Get the ski level and then have the nozzle at 90 Deg with the trim at center. for the 2deg wedge what is the measurment from centres of the holes in the rod end and the connecting hole to the VTS plastice peice.
for the help
01-26-2007, 03:20 PM #2
most of the rods are preset i thought...
01-26-2007, 03:43 PM #3
01-26-2007, 03:46 PM #4
I just pulled my out of the package and installed it.
It is ok to me...
01-26-2007, 08:34 PM #5
Yeah the Vts rods are deffentley pre set. Ive been told by more then one person including riva. My suggestion woudl be to call riva and ask how long its supose to be from end to end.
01-27-2007, 04:18 AM #6
I have made my own rod so just wondering on the distance between hole to set it up ? I thought that the rod for the 2 deg wedge was about 1/2 inch longer than the oEM one .
01-27-2007, 10:28 AM #7
Rods are installed "as is". From Riva at least. Mine was.
01-27-2007, 10:35 AM #8
Well, I went to check mine & when set to 1 above center (which I guess is center) it's on the "down" a bit where I could see the venturi's line of fire was hitting the top of the steering a little. I turned in the adjustment 2.5 turns & now it's a straight shot at 1 above center. I musta been on a few beers when I messed with it before..
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By skoepp in forum Sea Doo ClassifiedsReplies: 4Last Post: 10-08-2009, 08:00 PM
By BAYOU FZR in forum Sea Doo ClassifiedsReplies: 0Last Post: 04-30-2009, 12:24 PM
By BAYOU FZR in forum 4-Tec PerformanceReplies: 0Last Post: 04-30-2009, 12:24 PM
By Sandy in forum Sea Doo Open DiscussionReplies: 7Last Post: 04-24-2007, 01:50 PM
By Ultra/RXP in forum Sea Doo Open DiscussionReplies: 0Last Post: 04-22-2006, 05:34 PM