Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 44
  1. #1

    GTХ turbo build

    Good afternoon.
    in the garage was an old long-forgotten GTX 4 tec. I decided to revive and build a turbo. I know that with a turbo to play without the necessary parts can withstand the tremendous stress is bad.
    Acquired all that is needed.

    injectors 80 lbs siemens
    Ferrea Lightweight Valve
    Supertech Performance Dual Valve Spring and Titanium Retainer Packages
    Carrillo connecting rod
    CP Forged Racing Piston Kits
    Open Loop Cooling Kit
    Lightened Camshaft Sprotsket
    Lightened flywheel 650 grams
    5830 Cea turbo
    intercooler Garret 1000 ---- Nick Russell assembly, a huge thanks to him, a good man. Beautiful hands
    Walbro 255
    MTX-L
    Aeromotive
    FPR
    Lighteed Camchaft 29 (Weight decreased by 140 grams)
    R & D Intake Grate
    Impeller 14/25 Solas speedfreeksrace
    Aem tru boost control
    Click image for larger version. 

Name:	????0770.jpg 
Views:	194 
Size:	94.4 KB 
ID:	276037
    more photos of construction progress
    Click image for larger version. 

Name:	????0733.jpg 
Views:	130 
Size:	30.2 KB 
ID:	276038 sawed the tail, for the convenience of thanks for the detail mitsakosgt
    Click image for larger version. 

Name:	????0786.jpg 
Views:	118 
Size:	49.0 KB 
ID:	276039
    Click image for larger version. 

Name:	????0784.jpg 
Views:	130 
Size:	53.3 KB 
ID:	276040Dismantle all parts of the body wash and vacuum to replace rivets, they were eaten with salt and just crumbled
    Click image for larger version. 

Name:	????0785.jpg 
Views:	117 
Size:	79.8 KB 
ID:	276041





  2. #2
    Click image for larger version. 

Name:	????0789.jpg 
Views:	123 
Size:	121.2 KB 
ID:	276042
    Stock Ride plate dismantled, removed the stone formed on the bottom, it was very tough, polished bottom

    Drove the plate Riva and Itake grate [email protected] , I grind the cells for deeper planting, then I filled them with resin and fiberglass, not to break them. Sorry picture of the process have been lost. It turned out this wayClick image for larger version. 

Name:	????0788.jpg 
Views:	115 
Size:	105.2 KB 
ID:	276043Click image for larger version. 

Name:	????0793.jpg 
Views:	131 
Size:	64.7 KB 
ID:	276046Click image for larger version. 

Name:	????0794.jpg 
Views:	132 
Size:	92.4 KB 
ID:	276047Click image for larger version. 

Name:	????0795.jpg 
Views:	118 
Size:	24.2 KB 
ID:	276049

  3. #3
    assembled motor. In the photo you can see the flywheel 650 grams lighter and lighter camshafts, he has become easier with 140 gramsClick image for larger version. 

Name:	????0776.jpg 
Views:	121 
Size:	98.6 KB 
ID:	276051Click image for larger version. 

Name:	????0780.jpg 
Views:	128 
Size:	97.9 KB 
ID:	276052Click image for larger version. 

Name:	????0817.jpg 
Views:	120 
Size:	63.6 KB 
ID:	276053Click image for larger version. 

Name:	????0800.jpg 
Views:	116 
Size:	93.8 KB 
ID:	276054Click image for larger version. 

Name:	????0822.jpg 
Views:	108 
Size:	46.9 KB 
ID:	276055

  4. #4
    Replaced all the riveting internal fixtures, cleaned and vacuumed the tank and the body, placed in a pump and set the tank in place.Click image for larger version. 

Name:	????0832.jpg 
Views:	93 
Size:	29.8 KB 
ID:	276056Click image for larger version. 

Name:	????0827.jpg 
Views:	100 
Size:	30.9 KB 
ID:	276057Click image for larger version. 

Name:	????0830.jpg 
Views:	92 
Size:	23.0 KB 
ID:	276058
    Click image for larger version. 

Name:	????0833.jpg 
Views:	100 
Size:	95.2 KB 
ID:	276059Click image for larger version. 

Name:	????0834.jpg 
Views:	97 
Size:	39.8 KB 
ID:	276060

  5. #5
    put the engine into the bodyClick image for larger version. 

Name:	????0837.jpg 
Views:	141 
Size:	109.3 KB 
ID:	276066

    Bought argon-arc welding equipment. A week went to use it, in general, neither of which is complicated.
    began to build a turbo kitClick image for larger version. 

Name:	????0856.jpg 
Views:	161 
Size:	58.4 KB 
ID:	276061Click image for larger version. 

Name:	????0861.jpg 
Views:	173 
Size:	117.1 KB 
ID:	276064Click image for larger version. 

Name:	????0872.jpg 
Views:	170 
Size:	97.3 KB 
ID:	276063Click image for larger version. 

Name:	????0873.jpg 
Views:	176 
Size:	101.0 KB 
ID:	276065

  6. #6
    fixed the intercoolerClick image for larger version. 

Name:	????0874.jpg 
Views:	141 
Size:	115.6 KB 
ID:	276067
    fixed the intercooler
    made of stainless steel holder and filter cleaningClick image for larger version. 

Name:	????0877.jpg 
Views:	137 
Size:	56.2 KB 
ID:	276068Click image for larger version. 

Name:	????0878.jpg 
Views:	132 
Size:	101.6 KB 
ID:	276069

  7. #7
    Way cool, I decided to do soClick image for larger version. 

Name:	plate-first-tee_supply 1.jpg 
Views:	150 
Size:	44.2 KB 
ID:	276072

    Head spinning, I can not think how to fix the turbo kit? People tell me, can I set the mount like this? bottom is rubber bumpers.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	????0875.jpg 
Views:	121 
Size:	49.7 KB 
ID:	276070   Click image for larger version. 

Name:	????0876.jpg 
Views:	124 
Size:	62.9 KB 
ID:	276071  

  8. #8
    When I removed the engine, and I shot krepleniyadvigatelya also tell people what should be the longitudinal motion of the shaft of the impeller to the motor?Attachment 276074

  9. #9
    Autism Speaks. Its Time To Listen gOt BoOsT's Avatar
    Join Date
    May 2011
    Location
    Cali
    Posts
    1,413
    +1
    51
    nice work! wish my wife set the table with stuff like that lol

  10. #10
    formerly Gold06RXP Turbo Nick's Avatar
    Join Date
    May 2007
    Location
    Dayton, OH
    Posts
    2,095
    +1
    97
    Its lookin great Egor!! Its gonna be a rocketship!!

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 18
    Last Post: 03-17-2014, 02:37 PM
  2. My Turbo build
    By Shark in forum Sea Doo Build Threads
    Replies: 168
    Last Post: 12-16-2010, 08:13 PM
  3. Is there any turbo build
    By silvertaws6 in forum Yamaha PWC Performance (4-stroke)
    Replies: 76
    Last Post: 12-07-2010, 11:48 PM
  4. My Turbo build
    By Shark in forum 4-Tec Performance
    Replies: 6
    Last Post: 10-09-2010, 08:29 PM
  5. 15F turbo build
    By pete71 in forum Kawasaki Projects
    Replies: 116
    Last Post: 10-29-2009, 03:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •