Thread: Fault Code P0340 & P0231
07-02-2012, 06:40 PM #1
Fault Code P0340 & P0231
I am getting the P0340 & P0231 on my 2010 RxtX. I pulled all my fuses and checked along with battery. Voltage is reading 13.07 to 13.00. and hasn't dropped below 12.85 while turning it over. Ran it a couple days ago for an hour with no problems or codes. Any idea's and does anyone have a list of fault codes for this model? I know there are generic Sea-Doo lists. Thanks
07-02-2012, 07:47 PM #2
P0340 = ECM Camshaft 1 signal error
P0231 = ECM Fuel pump open circuit or short to ground
Dude, you're racing and you don't have a manual?
07-02-2012, 08:03 PM #3
07-03-2012, 12:35 AM #4
Any other help on how to fix this please??? or Manual able to down load in PDF??? Thanks
07-03-2012, 06:07 AM #5
07-03-2012, 07:56 AM #6
1) Are you running a stock ecu?
2) Have you checked all of your electrical connections, specifically the CAN connection by the battery? I would basically guarentee something is loose and causing you to code out (unless you are running a reflash)
07-03-2012, 03:12 PM #7
ECU has been redone by Bo @ Neptune Racing. All of the fuses in both black boxes are good with no water and plenty of grease with no corrosion. I will flip them over and make sure done have come out the back of them. Thanks for the help and will see what I can do. Something must of come lose because it ran fine the other day and now nothing. Damn Gremlins!
07-03-2012, 05:08 PM #8
- Join Date
- Jan 2006
- Rydal, Georgia U S A
sounds like the ecu....just happened to me today
07-03-2012, 06:36 PM #9
07-08-2012, 12:57 PM #10
Jawz, plan on calling you later tonight when I start driving home if that works. Once again you might be able to save the day...what a great guy, and good racer.
Does anyone have the manual in a compressed form for email or able to send a CD-ROM of one? Only one I have to trade is for 2004 Honda R12X, bout 380 pages.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)