Results 1 to 6 of 6
  1. #1

    Join Date
    Jun 2012
    Location
    Newnan, Ga
    Posts
    36

    Mill factory head or buy aftermarket?

    My 1996 raider 1100 has 120 psi on all three. I want the best low end punch I can get. Aftermarket head or mill stock? 13/19 best prop for my low end? I see 13/17 and X0 and 13/19. Not sure which way to go. Thx


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by ars2xltraider View Post
    My 1996 raider 1100 has 120 psi on all three. I want the best low end punch I can get. Aftermarket head or mill stock? 13/19 best prop for my low end? I see 13/17 and X0 and 13/19. Not sure which way to go. Thx
    cheapest way will be to get your stock head milled.

  3. #3

    Join Date
    Jun 2012
    Location
    Newnan, Ga
    Posts
    36
    Jim, do you have a plate you recommend for the raider that out performs the stock one? If so, what kinds of differences can be expected? Thx

  4. #4
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by ars2xltraider View Post
    Jim, do you have a plate you recommend for the raider that out performs the stock one? If so, what kinds of differences can be expected? Thx
    I have installed a couple pro tec for customers that were happy with them.

  5. #5

    Join Date
    Jun 2012
    Location
    Newnan, Ga
    Posts
    36
    What part number would I ask for when I order it?

  6. #6
    silvercrxsir's Avatar
    Join Date
    Sep 2011
    Location
    ocala,fl
    Posts
    334
    +1
    8
    Milling the factory head works good just make sure you double check the squish to make sure you have the proper clearances.I wouldn't go over 150psi or else you might need to run race fuel you might be needing it cut some where in the .020-.030 from what I heard .010 =10psi

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Build head or buy take off head
    By Wakesk8er2 in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-28-2015, 09:30 PM
  2. Riva heads or Oem milled head
    By thatdude596 in forum Yamaha PWC Performance (2-stroke)
    Replies: 25
    Last Post: 12-27-2012, 11:54 PM
  3. Ada head or keep stock head and get it milled?
    By waverider1200 in forum Yamaha Old School Skis
    Replies: 8
    Last Post: 06-21-2012, 08:38 PM
  4. WTB Stock or Milled Stock head for 65U
    By Hockey369 in forum Yamaha Classifieds
    Replies: 3
    Last Post: 05-14-2011, 08:38 PM
  5. milled head or Riva?
    By dogger in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 01-03-2008, 09:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •