07-05-2012, 10:31 AM #1
Innovate MTX-L AFR Gauge acting up?
I have been using my Innovate MTX-L for about 2 months now with no problems,
Then out of the blue yesterday on start up instead of the words HEAT it just kept sweeping the lights around the dial in a clockwise direction,
I pulled the des key, let it power down then put the des key in and it worked like normal,
Then 10 minutes later, same thing, but this time when I let it power down and tried to restart back to sweeping the lights in a clocwise direction?
Any ideas, I tried calling Innovate but they are closed for the Holidays?
07-05-2012, 10:39 AM #2
weird. try swapping the sensor if you have a spare or do a free air calibration?? wiring/ground OK?
07-05-2012, 11:24 AM #3
- Join Date
- Nov 2007
- Branson, MO area
Is the O2 sensor in the J pipe?
07-05-2012, 12:48 PM #4
no the O2 sensor is in the exhaust manifold, I will try the free calibration tonight, and check my wires,
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)