Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1

    how can i tell if i have updated stator installed on my polaris slt700 1996

    is it possable to tell if i have the new stator installed on this polaris slt 700 1996 that i just bought.just wondering cause all the bolts heads are stipped to get stator off but it looks like new.


  2. #2
    i have no spark either but its got the new cdi #4010449 on the cdi.

    Does not have the updated coil. Will it work with old coil?
    Last edited by K447; 07-15-2012 at 01:11 PM.

  3. #3
    I'm addicted to Polaris PWC ghostinstallations's Avatar
    Join Date
    Aug 2011
    Location
    Rochester, New York
    Posts
    920
    +1
    28
    Welcome to The Hulk. If you have the CDI, you have the stator.

    http://polarispwcknowledge.shorturl.com/ will answer all your questions.

  4. #4
    i will check out the link thank you

  5. #5
    everthing is hooked up correctly all tests good too so do i need the new style coil to work with this? thank you

  6. #6
    casey67's Avatar
    Join Date
    Sep 2006
    Location
    Lemont,IL
    Posts
    2,571
    +1
    35
    post some pictures of your CDI/coil setup.
    Look at the back side of the CDI.

  7. #7
    I'm addicted to Polaris PWC ghostinstallations's Avatar
    Join Date
    Aug 2011
    Location
    Rochester, New York
    Posts
    920
    +1
    28
    Quote Originally Posted by adkinsmatthew View Post
    everthing is hooked up correctly all tests good too so do i need the new style coil to work with this? thank you

    That makes no sense. If you tested the stator to be good, then the CDI is bad. There are no tests for a CDI. You test everything else, and it comes back good, you then assume the CDI is bad.

  8. #8
    i am going to try and pull the stator off today.

    I believe the previous owner only purchased an updated cdi with yellow marker showing 4010448 on the cdi. will this cdi work with old stator?

    if not i believe that might be the problem i have.
    Last edited by K447; 07-15-2012 at 01:10 PM.

  9. #9
    i will post pics later today..thanks for the help.

  10. #10
    correction the part number wrote on the cdi is 4010449.

    just can not figure out why no spark.
    Last edited by K447; 07-15-2012 at 01:09 PM.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How can I tell if I have a cut or stock R&D rideplate
    By bscpaint in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-03-2013, 09:51 PM
  2. 1998 SLTX 1050 Domestic How can I tell If CDI is updated
    By engr146 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 11-25-2009, 01:06 AM
  3. how can I tell if i have the 08 supercharger rebuild kit?
    By gsxr800 in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-07-2009, 09:43 PM
  4. How can you tell if you have a 96xp 5858 or 5859
    By ashelgren in forum 2-Stroke Performance
    Replies: 6
    Last Post: 08-08-2008, 09:40 AM
  5. How can you tell if you have gas in the oil?
    By carolinafloats in forum Kawasaki PWC Performance (4-stroke)
    Replies: 7
    Last Post: 08-31-2007, 03:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •