Results 1 to 7 of 7
  1. #1
    macdoo's Avatar
    Join Date
    May 2010
    Location
    Acworth, Ga
    Posts
    264
    +1
    1

    Will 900cc from a 98 work in a 2002 VirageTX 1200

    My Virage TX 1200cc has a crack in the case. Can I just drop a 900cc with the 1200cc stator/flywheel installed and wil it work?


  2. #2
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    yes and no.it'll fit,but you'll have to check the timing with the 1200 stator flywheel combo as the crank stroke is different and would result in different timing between the 2.maybe a updated 900 cdi and a retime to make sure its right

  3. #3
    macdoo's Avatar
    Join Date
    May 2010
    Location
    Acworth, Ga
    Posts
    264
    +1
    1
    updated 900 cdi and a retime to make sure its right

    What is that would the 98 jetski it came out of have it?

  4. #4
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,775
    +1
    400
    maybe,if somebody replaced the stator,cdi combo with an updated version you could just run that stator cdi combo in the virage e-box.i'd suggest running the 900 prop in the tx as the stock 1200 prop would probably pull the rpms down too much as well.allthough the tx carbs are bigger at 40mm than the 900's at 38mm and would make some better acceleration.look at the water routing as well,pretty sure the both flow water the same way,ditch the t-stat and spring valve assemble in the 900 motor water manifold on top of the motor

  5. #5
    Azzak's Avatar
    Join Date
    Aug 2010
    Location
    Manitoba, Canada
    Posts
    24
    Saw this in the classifieds just thought I'd share

    http://www.greenhulk.net/forums/showthread.php?t=177911

  6. #6
    macdoo's Avatar
    Join Date
    May 2010
    Location
    Acworth, Ga
    Posts
    264
    +1
    1
    Thanks

  7. #7

    Join Date
    Feb 2010
    Location
    Port Lambton, Ontario
    Posts
    44
    Bgaiden has a good 1200 motor for sale

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Will the fizzle xs intercooler work in a 2008 rxp-x 255
    By travis ingram in forum 4-Tec Performance
    Replies: 13
    Last Post: 06-02-2014, 08:00 PM
  2. Replies: 2
    Last Post: 03-22-2014, 07:37 PM
  3. Will a GP800r gauge/display work in a GP1200r?
    By Gannz in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 05-29-2011, 12:42 PM
  4. Will A 2001 Cdi Box Work In 1999 Ultra 150
    By macattack in forum Kawasaki PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-09-2008, 06:24 PM
  5. Will A 155 Throttle Body Work In a 185hp?
    By JeffSki in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-07-2008, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •