Results 1 to 4 of 4
  1. #1

    2003 MSX 140 Jet pump repair..............

    Does anyone have a step by step instruction on how to re-place the bearings and seals in the jet pump? Please advise

  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    near Toronto, Canada
    Have you looked at the jet pump sections in my signature links?

  3. #3
    cordespc's Avatar
    Join Date
    Dec 2011
    Eastern NC
    K447's links were very helpful. Remember that the MSX shaft will remain in the hull, and will need a special tool for removal if you would like to change the through hull bearing and seals. If you're going to the trouble to replace the pump bearings, changing the through hull bearing and seals is only a small bit of extra work with the right tools.

  4. #4
    Thanks! Thru Hull bearing was bad anyway so I replaced everything! Quite a project!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts