07-15-2012, 05:54 PM #1
Intercooler type 5 - sold to Shark
Brand new type 5 intercooler. I tried to fit this in my conversion ski, but it was too tight a fit. I already have one of these in my RXPX. These intercoolers are so much better than the type 3's. They have no heat fade on those extended wide open throttle runs. Inlet temps are 40 degrees cooler then a type 3. I have already drilled and tapped it for the pisser. I would like $150.00 + $20.00 shipping, thats half of what I just paid. Its brand new never used (only used for mock up). They retail for $299.99. Here is a link to the place that it was purchased from as well as more specs on this awesome intercooler.
This impressive Liquid/Air intercooler is better than any FMIC.
100% Lightweight aluminum, No Epoxy Used In Core
Recommended for up to 1500 CFM / 1200 HP
Pressure Drop: Less than 0.2 PSI. This is not a typo! Liquid/Air Intercoolers have incredibly low pressure drop.
16"x12.5"x4.5" - S/S I/O (Type 5)
Inlet: 3.5" Outlet: 3.5"
Core Size: 10"x9"x4.5" (Endtanks add to length)
Last edited by vspec1; 07-16-2012 at 08:31 PM.
07-16-2012, 02:34 PM #2
07-16-2012, 03:27 PM #3
- Join Date
- Oct 2007
Hello , is possible installation on stock intercooler plate? and manifold stock is good? thanks
07-16-2012, 05:16 PM #4
Here is Cashito's mounted in his RXPX, will also work in a RXP, just not sure if it will fit in the stock location on a X, Ive never tried it. The stock intake is good. I prefer the plastic intake over the aftermarket ones because they don't hold in heat. If you are upwards of 18lbs than you have to go aftermarket on the intake, the stock one will split. Thanks, Patrick
07-16-2012, 05:33 PM #5
I have one mounted on my old Gen 1 riva IC bracket in my RXP. I also utilized the Gen II metal riva discharge tube, from it to the TB. Tight fit that way, but works great with a turbo @ 20 psi
07-16-2012, 05:38 PM #6
Here is a pic of jp1300r's mounted in his 2008 RXPX, My X is torn apart right now so I don't have any good pics of it mounted.
07-16-2012, 05:40 PM #7
07-16-2012, 08:28 PM #8
07-16-2012, 08:31 PM #9
07-16-2012, 09:02 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)