Thread: Need to bum a J-pipe
07-15-2012, 06:06 PM #1
Need to bum a J-pipe
Hey guys, I think the machine shop screwed up when I had the them install my O2 bung on my jpipe and I think its leaking. My gauge calibrates and reads 22.4 but as soon as I hit the throttle I get the E8 error on the Innovate AFR gauge. Does anyone have a Jpipe that has an O2 bung in it that I can bum with the option to buy and see if its the Jpipe before I replace the gauge itself? Thanks in advance
07-15-2012, 07:14 PM #2
Man I fill your pain, I went thru the same thing for about two month. My advice to you is get an 08 mani tap and be done with it. I damage 5 sensor on my quest luckily I had the warranty from advance auto. Good luck!
07-15-2012, 07:29 PM #3
would be nice but I dont have that kind of cash laying around at the moment to upgrade to an 08 exhaust. I will upgrade next season. just need to get through this season. gotta put a roof on the house first.
07-16-2012, 09:16 AM #4
- Join Date
- Jul 2011
Can't you just have the welds checked to make sure there's no leaks ?
07-16-2012, 09:31 AM #5
Preasure test the j-pipe to check for leaks.
07-16-2012, 04:11 PM #6
07-17-2012, 09:01 AM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)