Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 33

Thread: V-50 vs et24

  1. #1
    Phil.Borg's Avatar
    Join Date
    Aug 2009
    Location
    Sydney AUS
    Posts
    403
    +1
    3

    V-50 vs et24

    Who has tryed and has some actual info on these two chargers?

    Pros & cons?

    What intercooler do u have and what inlet temps are u seeing?


  2. #2
    Talking about the boost, bad luck with the V50 no more than 17-18 Psi, i'm going to try the ET24 and see if that will change.

  3. #3
    Quote Originally Posted by Diver View Post
    Talking about the boost, bad luck with the V50 no more than 17-18 Psi, i'm going to try the ET24 and see if that will change.
    @ what rpm?

  4. #4

  5. #5
    BAYOU FZR's Avatar
    Join Date
    Mar 2009
    Location
    Thibodaux L.A.
    Posts
    792
    +1
    31
    Something must be wrong there I see 22 @8600 what elevation are you running in?

  6. #6
    Sea level, believe me i tried everything cross my mind, no air leak, i changed the spring in the BOV and then added more washers to stiffen the spring and nothing changed.

  7. #7
    What type of BOV you are running?

  8. #8
    BAYOU FZR's Avatar
    Join Date
    Mar 2009
    Location
    Thibodaux L.A.
    Posts
    792
    +1
    31
    Quote Originally Posted by Diver View Post
    What type of BOV you are running?
    Tial Q with a 3lb spring

  9. #9
    Guys changing the spring in the BOV will not help keep the valve closed under accelleration. It only controls the opening speed on de-cell. Your boost reference hose from the intake manifold to the BOV keeps equal pressure on the top side of the BOV keeping it closed on accell.
    http://www.siliconeintakes.com/stpg.php?page_id=bov
    Here is the hi dollar BOV i use on my superstock FZR.
    http://www.siliconeintakes.com/produ...b2697249f6d163

  10. +1 by:

    N8R

  11. #10
    BAYOU FZR's Avatar
    Join Date
    Mar 2009
    Location
    Thibodaux L.A.
    Posts
    792
    +1
    31
    Quote Originally Posted by rossnemo View Post
    Guys changing the spring in the BOV will not help keep the valve closed under accelleration. It only controls the opening speed on de-cell. Your boost reference hose from the intake manifold to the BOV keeps equal pressure on the top side of the BOV keeping it closed on accell.
    http://www.siliconeintakes.com/stpg.php?page_id=bov
    Here is the hi dollar BOV i use on my superstock FZR.
    http://www.siliconeintakes.com/produ...b2697249f6d163
    Ross I run the 3lb which is recommended by tial with a supercharged application

    http://www.tialmedia.com/documents/BOVspc.png

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Riva ECU, Delphi 50s vs Bosch 48s ?
    By DaveC in forum 4-Tec Performance
    Replies: 9
    Last Post: 07-15-2013, 06:11 AM
  2. Riva 50s vs Delphi 50s
    By DR2006RXP in forum 4-Tec Performance
    Replies: 10
    Last Post: 04-01-2013, 04:15 PM
  3. 15f vs ultra 50 to buy
    By rpwattee26 in forum Kawasaki Open Discussion
    Replies: 4
    Last Post: 05-30-2010, 07:15 AM
  4. Replies: 1
    Last Post: 08-16-2008, 03:59 PM
  5. Extended Steering Nozzle - 20 mm vs. 50 mm
    By Gipper in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 05-20-2006, 03:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •