Results 1 to 6 of 6
  1. #1

    Join Date
    May 2012
    Coopersburg, Pennsylvania, United States

    Question Need some help and suggestions

    So we took the ski(2000 xp 951) out for the first time in 2 years and when we finished flushing it out and started the other ski on the double trailer the shaking knocked off the air box so weand we notice the clip is lose. So we need a suggestion on what to do to either keep that on better or a different filter setup all together.

    I would also like to try to do some free or cheap mods so any suggestions would be appreciated. Also how to do them if you don't mind

  2. #2
    AndinoWatercraft's Avatar
    Join Date
    Feb 2008
    Puerto Rico
    Check Ben's thread on the top of the forum. There are some tips and tricks to get your XP to be more fun to ride.

  3. #3
    kecheme's Avatar
    Join Date
    Jul 2011
    Phoenix Az
    First check the lower air box mount and gromet. Then get some dish soap and apply a light coat to the large brown o-rings on the carbs. Reinstall the air box. Start at the bottom mount and slide air box on and lock the clip.

  4. #4

    Join Date
    May 2012
    Coopersburg, Pennsylvania, United States
    I didn't know there was a bottom mount. Im pretty sure that the o rings are good as they were just replaced. I read the sticky and am wondering were can I get the prok filter?

    I will check the stock on in a minute

  5. #5

    Join Date
    May 2012
    Coopersburg, Pennsylvania, United States
    I can't find any lower mount

  6. #6
    there is susposed to be a lower bracket with a pin on it - it sits on top of the starter and is held in place by the starter motor bolts.. The lower grommet in the filter housing slips over that pin.. You can also get the clamp bracket - but that issue is nothing a little bending can not fix.. You can also go with an aftermarket setup like R&D or K&N.. You will have to rejet if you go with any aftermarket filter though..

    Number 1 in this picture -

    Click image for larger version. 

Name:	Capture1.JPG 
Views:	61 
Size:	33.9 KB 
ID:	277564

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1999 Genesis engine rebuild (need some tips and help)
    By markdgenesis in forum Polaris Open Discussion
    Replies: 4
    Last Post: 07-17-2009, 04:50 PM
  2. I'm new and I need some help
    By Sutphen115 in forum 2-Stroke Performance
    Replies: 41
    Last Post: 09-26-2008, 06:25 PM
  3. Just bought a pair of XP's.. 97XP and 98XPL. need some help
    By midnight08 in forum 2-Stroke Performance
    Replies: 21
    Last Post: 09-26-2008, 07:47 AM
  4. Replies: 13
    Last Post: 09-01-2007, 11:20 PM
  5. Hello, I'm new here and need some help....
    By RXP Keith in forum 4-Tec Performance
    Replies: 17
    Last Post: 06-19-2007, 06:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts