Thread: Bilge pump install 2012 RTX260
07-21-2012, 04:43 PM #1
Bilge pump install 2012 RTX260
I have just ordered a bilge pump and thru-hull fitting to install on my RXT.
This is the pump I have ordered:http://www.imarineusa.com/johnsonpum...eduraport.aspx
This pump has the electronic switch for the auto feature, hope this one works well. I will post up pics
after the install is completed.
Any one use this pump?
07-21-2012, 06:41 PM #2
I installed that same pump on on my 2010 rxtx in thefront of the engine, and installed a second low profile pump rear of the engine. You will be happy with that pump, the electronic float switch is a great feature.
08-09-2012, 04:56 AM #3
- Join Date
- Aug 2010
This pump works well (shoots a 10' long stream), no mechanical contacts to wear out from the bouncing around in a PWC application, I have it installed on an RXP with out leaving any holes once I trade in the ski
08-09-2012, 07:40 AM #4
08-19-2012, 06:11 AM #5
I found a pump mounting block on my RXT with the holes already in place. It is on the port side of the pump tunnel between the tunnel and water box. The screen holes on this pump lined right up.
10-05-2012, 07:13 PM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)