07-24-2012, 03:44 AM #1
- Join Date
- May 2010
help please - 750 kawaski stx bored .5mm over sized - Adjusting the carbs
I have a 1997 stx 750 that Im rebuilding the engine . Has the dual carbs... Replaced the crank with a Hot rods crankshaft, new wsm pistons .5mm over sized the part number of the pistons are 010-821-05k Crank Joes is boring my cylinders.... Carburators are stock rebuilt and I'm looking at what my carbs should be adjusted too taking into consideration the engine is over sized... 1 1/4 high and 3/4 low is stock settings is what I've been told..Also what do you recomend for pop off pressures on the 750 big pin engines.. Stock air box and exhaust....
Thanks in advance...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)