Results 1 to 5 of 5
  1. #1

    Join Date
    May 2005
    Location
    Minneapolis
    Posts
    763
    +1
    26

    2005 tops removal

    I have removed the 2 bolts and it pulls up but not out trying not to break anything I think it might be bad any help? Thanks. Tim


  2. #2
    Quote Originally Posted by tchies View Post
    I have removed the 2 bolts and it pulls up but not out trying not to break anything I think it might be bad any help? Thanks. Tim
    Tim, why are you pulling the TOPs off? Why do you think it's Bad ? Do you know what the TOPS do ass a function in your 2005 Doo? Please provide us more info. BTW, if your holding the TOPS, don't pull on it. it is verrrrrryyyyy sensitive. Try to hold it in an upright position with one hand and post back with your other hand. Don't lower the TOPs Ass it will ruin the calibration of the TOPS sensor. Good luck

  3. #3

    Join Date
    May 2005
    Location
    Minneapolis
    Posts
    763
    +1
    26
    I seem to be blowing a lot of oil into the catch can. Thought it might be stuck just trying to check it

  4. #4

    Join Date
    May 2005
    Location
    Minneapolis
    Posts
    763
    +1
    26
    I saw that some have removed it. I'm not to worried about being upside down. Been having intermitent missing changed plugs coils gas. Thanks

  5. #5

    Join Date
    May 2007
    Location
    Lincoln, Ne
    Posts
    31
    It is normally open and should be allowing crankcase gases to escape. If you are having more oil come out of it than normal, you should do a compression and leak-down test to ensure your rings aren't allowing excessive blow-by.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2006 Hood/Cover Swap on 2005 Top Deck
    By bex in forum Yamaha PWC Performance (4-stroke)
    Replies: 0
    Last Post: 08-30-2012, 11:04 AM
  2. top speed 2005 rxt?
    By wavehummer in forum 4-Tec Performance
    Replies: 12
    Last Post: 02-29-2008, 10:07 PM
  3. 2005 RXP SC removal
    By Mccoy in forum 4-Tec Performance
    Replies: 11
    Last Post: 09-07-2007, 10:15 AM
  4. Removing knock sensor on 2005 rxp for rr ecu
    By Chezzy in forum 4-Tec Performance
    Replies: 2
    Last Post: 04-13-2006, 07:34 PM
  5. 2005 GP1300R low top speed
    By Spager in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 12-09-2005, 12:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •