Results 1 to 7 of 7
  1. #1

    London 2006 gp1300r owner

    Hi all this is my first post and a bit of info on the efi settings.I bought a 2006 gp1300r with some mods
    D plate + chip
    power filter
    f/f exhuast
    top loader intake grate
    solas dynafly
    trim tabs
    pro series sponsons
    riva efi

    When i checked the settings on the efi controller they are 2222 .Read all the posts i can and they do seam a bit way off what others are runing.I havent had it on the water as yet due to work and wot not so cant say how it runs .The fella i bought it off said it runs spot on ,so i dont want to change any thing unless you people think it is gonna run lean in any way on those settings
    Anyway hi from london GB
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	003.jpg 
Views:	55 
Size:	109.6 KB 
ID:	279015   Click image for larger version. 

Name:	002.jpg 
Views:	46 
Size:	104.1 KB 
ID:	279014   Click image for larger version. 

Name:	004.jpg 
Views:	53 
Size:	113.5 KB 
ID:	279016  


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by PAZZY View Post
    Hi all this is my first post and a bit of info on the efi settings.I bought a 2006 gp1300r with some mods
    D plate + chip
    power filter
    f/f exhuast
    top loader intake grate
    solas dynafly
    trim tabs
    pro series sponsons
    riva efi

    When i checked the settings on the efi controller they are 2222 .Read all the posts i can and they do seam a bit way off what others are runing.I havent had it on the water as yet due to work and wot not so cant say how it runs .The fella i bought it off said it runs spot on ,so i dont want to change any thing unless you people think it is gonna run lean in any way on those settings
    Anyway hi from london GB
    welcome to the forum. The efi should be with the mods you have 4-4-1-6

  3. #3
    Hi thanks for the reply,been getting as much info from here (great forum buy the way ) as poss ,but i read a lot about this keyway and porting,raised compression ect .Wouldnt know if this has been done ,but by running these settings as you say it sounds a lot more safer setting in terms of the motor not running lean as of the 2222 setting.If ive got it right theses settings are more richer
    Thanks jims performance for the quick reply

  4. #4
    1-1-1-1 is stock

  5. #5
    Just to get my head around this could it of. been set like this to elminate the mid range lean part .I
    say this because if the rpm pot is set at 2 does the mid fuel settings switch earlier to the red wich takes the motor through the lean spot with more fuel or dosent it work like that
    cheers all

  6. #6

    Join Date
    Oct 2011
    Location
    aurora IL
    Posts
    316
    your Hull painted or wrapped in stars?

  7. #7
    Quote Originally Posted by hoffmanestates View Post
    your Hull painted or wrapped in stars?
    Hi m8 just bought a sticker set of ebay and stuck them on

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2006 GP1300R Owners Manual
    By handyandy28 in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 02-26-2014, 07:07 PM
  2. 2006 Gp1300r Compression
    By GP1300r110 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 06-24-2007, 10:56 AM
  3. new gp1300r owner
    By kw1605 in forum Yamaha Open Discussion
    Replies: 10
    Last Post: 06-05-2007, 11:11 PM
  4. 2006 GP1300R what holds throttle body with aftermarket Power plenum install?
    By MJE in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 05-30-2007, 03:25 PM
  5. D plate on 2006 gp1300r
    By Robert63 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 10-27-2006, 02:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •