07-30-2012, 07:23 PM #1
SMW pump 2" extension spacer & Worx intake grate for 215 RXT
I have a 2" spacer with studs, nuts, O ring with steering & reverse extensions to get rid of. It's for an RXT, it will work on an RXP but you'll need a custom shaft and 2" longer pump bolts. You will just need an RXTX drive shaft and you're set. It's well used but works all the same.. If you're looking for a pretty looking spacer this isn't for you.
325.00 shipped in the U.S
Worx RXT 215 grate. I drilled 2 holes to fit a riva X plate... otherwise it works the same...
100.00 shipped Shipped in the U.S SOLD
Last edited by ou812; 08-15-2012 at 02:37 PM.
07-30-2012, 07:24 PM #2
08-01-2012, 12:44 AM #3
so if you use a rxtx pump shoe and drive shaft on 215 rxt is the same as 2" extension ?
08-01-2012, 08:11 AM #4
If you go with the X shoe then you will need the X grate and plate and also pump bolts and shoe bolts since the rxt uses studs. But yes, its the same after all that
08-01-2012, 11:38 AM #5
- Join Date
- Jun 2008
- GREECE ATHENS , NAXOS
Interested on this....I ll let you know Jim.
08-04-2012, 07:08 PM #6
Pump ext is on hold for now...
105.00 shipped on the worx grate. It worx the same with the other 2 holes drilled in it.
08-12-2012, 11:27 AM #7
08-12-2012, 03:11 PM #8
08-15-2012, 02:37 PM #9
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)