Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 54
  1. #1
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6

    FZS 2009 fully built motor STG 3

    FOR SALE 2009 Yamaha FZS SHO stage 3. like new condition $13500. the ski was never raced or abused and has been a rec ski to this point.
    Total hours on hull 45.
    total hours on fresh motor 5 hours. The stock motor was never abused or blown up. I wanted a reliable high boost setup, so, a complete replacement of stock internals was done. Motor has K1 rods with new bearings and rod bolts, RD big bore 1.9 L pistons and cylinder liners replaced with better than oem liners - great mod but expensive machine work. Upgrade valvetrain for high rpm with RD kit. All gasket and all bolts replaced on the motor. while the head was off I had it ported.
    Riva driveshaft sleeve, Stock transom plate was bored to 160 and a riva 160 mm prop liner installed along with 15/23 riva/skat prop.
    Fizzle intercooler kit with spare IC and spare BOV. dual feed block for individual cooling lines to motor and IC
    R3 ECU
    riva RRFPR
    Riva cold air intake
    TBM intake grate
    COCO tunnel reinforcement, billet aluminum rideplate brackets.
    ET 18 SC with a new 2009 clutch.
    Riva gen 3 SC shaft kit
    riva seat cover
    AFR gauge installed and boost gauge installed in carbon fiber glove box lid
    FF exhaust, tommy jordan mod
    more parts and spares to come when I get a chance to go through things in boxes.
    Valvespring compressor, coupler wrench, crank tool included.
    located North Aurora ILLINOIS, 630-643-1101
    [email protected]
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	FZSpic2.jpg 
Views:	427 
Size:	120.9 KB 
ID:	279179   Click image for larger version. 

Name:	FZSpic.jpg 
Views:	438 
Size:	127.8 KB 
ID:	279180   Click image for larger version. 

Name:	FZSpic3.jpg 
Views:	452 
Size:	125.7 KB 
ID:	279181   Click image for larger version. 

Name:	FZSpic4.jpg 
Views:	315 
Size:	53.6 KB 
ID:	279182   Click image for larger version. 

Name:	FZSpic5.jpg 
Views:	481 
Size:	84.3 KB 
ID:	279183  
    Last edited by dhoad; 08-02-2012 at 12:53 PM.


  2. #2
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    A couple more pics bored transom and carbon fiber glove box lid with boost gauge and AFR.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	fzspic8.jpg 
Views:	309 
Size:	61.8 KB 
ID:	279214   Click image for larger version. 

Name:	fzspic7.jpg 
Views:	380 
Size:	74.7 KB 
ID:	279215  

  3. #3
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    On the pontoon where you in the superman when you got 22mph?? Seriously great ski over my budget by a smige but great deal

  4. #4
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    Quote Originally Posted by shrabber View Post
    On the pontoon where you in the superman when you got 22mph?? Seriously great ski over my budget by a smige but great deal
    Yessir on the pontoon I was supermanning, motor trimmed for lift and pontoons filled with helium.

    On another note, there are all kinds of tools and spares that come with the ski.
    Ropes, life jackets, anchor, etc
    I had this motor and ski built by an experienced local pwc tuner mechanic.
    Fresh oil change with amsoil, new filter, new plugs. Gas tank will be full of premium fuel for buyer.
    I will include a new 160 prop if I get my asking price.

  5. #5
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6

    pics

    For people who ask about speeds I will tell you I have gone 83 mph in 100 degree heat, full fuel, 230 lb rider sitting upright with stock rideplate and the spacers installed no shimming for angle, throttle had room left to squeeze. 8600 rpm.
    I think I can safely say this is an 85 mph ski and will verify this when I get to ride labor day weekend.

  6. #6
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    Forgot to mention I would be open to trades plus cash also.
    I still need a second ski but this one has to much invested to not be ridden

  7. #7
    maxadrenaline's Avatar
    Join Date
    Nov 2007
    Location
    RETIRED !! In Mobile AL or Wherever I Want To Go
    Posts
    1,414
    +1
    137
    Quote Originally Posted by dhoad View Post
    FOR SALE 2009 Yamaha FZS SHO stage 3. like new condition $13500. the ski was never raced or abused and has been a rec ski to this point.
    Total hours on hull 45.
    total hours on fresh motor 5 hours. The stock motor was never abused or blown up. I wanted a reliable high boost setup, so, a complete replacement of stock internals was done. Motor has K1 rods with new bearings and rod bolts, RD big bore 1.9 L pistons and cylinder liners replaced with better than oem liners - great mod but expensive machine work. Upgrade valvetrain for high rpm with RD kit. All gasket and all bolts replaced on the motor. while the head was off I had it ported.
    Riva driveshaft sleeve, Stock transom plate was bored to 160 and a riva 160 mm prop liner installed along with 15/23 riva/skat prop.
    Fizzle intercooler kit with spare IC and spare BOV. dual feed block for individual cooling lines to motor and IC
    R3 ECU
    riva RRFPR
    Riva cold air intake
    TBM intake grate
    COCO tunnel reinforcement, billet aluminum rideplate brackets.
    ET 18 SC with a new 2009 clutch.
    Riva gen 3 SC shaft kit
    riva seat cover
    AFR gauge installed and boost gauge installed in carbon fiber glove box lid
    FF exhaust, tommy jordan mod
    more parts and spares to come when I get a chance to go through things in boxes.
    Valvespring compressor, coupler wrench, crank tool included.
    located North Aurora ILLINOIS, 630-643-1101
    [email protected]
    This is an awesome machine and a sweet deal for someone. Doug is very meticulous about his stuff. You will not find a cleaner 09 with these mods !!

  8. #8
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Great ski I need to scrape up some cabbage

  9. #9

    Join Date
    Feb 2006
    Location
    Birmingham AL
    Posts
    2,924
    +1
    2
    Quote Originally Posted by dhoad View Post
    Forgot to mention I would be open to trades plus cash also.
    I still need a second ski but this one has to much invested to not be ridden

    What are you looking for as partial trade? Email me at [email protected]

  10. #10
    Maybe 85 my ass... That much motor and boost 90 can be had pretty easy.. Put a Jims VX plate on it and fly... Awesome deal for somebody..

Page 1 of 6 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts fully built motor
    By Palm Beach Punisher in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 08-05-2016, 07:13 AM
  2. SOLD 2013 FX S(V)HO With FULLY Built Motor & Triton Trailer
    By WP3223 in forum Yamaha 4 Stroke Skis
    Replies: 21
    Last Post: 07-06-2015, 06:10 PM
  3. SOLD 2011 FULLY BUILT Yamaha FZS Waverunner
    By FZS Monty in forum Yamaha 4 Stroke Skis
    Replies: 11
    Last Post: 06-02-2014, 05:05 PM
  4. FZ Built Motor Break In, and New SVHO
    By FZS Monty in forum Yamaha PWC Performance (4-stroke)
    Replies: 9
    Last Post: 04-14-2014, 11:31 AM
  5. FS 2009 RIVA Stage 3 FZR + + + Fully built motor
    By stangbang in forum Yamaha 4 Stroke Skis
    Replies: 11
    Last Post: 06-09-2011, 01:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •