08-01-2012, 09:10 PM #1
Eastern NC 4-Tec owners, I need some help
Putting together a gprxp project that someone else had started and wire harness is laid in the hull with connectors everywhere. ( kinda intimidating) If you have an 4 tec ski with MPEM system I'd like to look under your hood at the routing of your harness. Will be happy to pay you for your time. I'm located in Greenville North Carolina and can travel around in the surrounding area to peek at your harness. On Mondays I run up 95 to chester va and Weds usually head to the Atlantic beach and free most all other days.
I also am proud new owner of a candoo and can return favor on your ski by checking codes/programming keys/ or whatever its capable of , changing your oil and resetting service if needed.
If you or you know someone that has something that will work it would be great. My harness is 05 but I think any supercharged mpem setup would be a big help to look at. Thanks
08-01-2012, 09:20 PM #2
Most of the plugs can only go in one spot. There are a few that can be switched off the top of my head the TOPS valve (two wire) and the front oil pressure switch (One wire). Here is the schematic just match the colors of the wires. Holler if you need pics or help.
PS PP beerdatr@yahoo... LOL
08-01-2012, 09:30 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)