Results 1 to 3 of 3
  1. #1

    Join Date
    Jul 2012
    Location
    Knoxville (Corryton), TN
    Posts
    204
    +1
    10

    Where is the HSN on a 1200 ltd?

    Really stupid question as the ski is not in front of me, at the lake or I would look. The guy who built the motor before me did completely rebuilt the carbs and tune them so the caps should be drilled out. I know it is a really dumb question, but where is the HSN? Is it accessible easily, in other words is it on top of the carb when you take the seat off? Sorry for such a newbie question, just need to know if it is not so I can bring tools out to the lake this weekend?

    2000 XL 1200 LTD.


  2. #2
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Yes they are on the top of the carbs, but just because they were rebuilt does not necessarily mean the tamper caps were removed. Also the #3 carb is under the exhaust bracket and not accesible.
    Bill

  3. #3

    Join Date
    Jul 2012
    Location
    Knoxville (Corryton), TN
    Posts
    204
    +1
    10
    Quote Originally Posted by OsideBill View Post
    Yes they are on the top of the carbs, but just because they were rebuilt does not necessarily mean the tamper caps were removed. Also the #3 carb is under the exhaust bracket and not accesible.
    Bill
    Okay, so I should have no problems taking off the seat and being able to adjust #1 and #2. I will take off the bracket and richen it up a bit if they have been drilled.

    I am thinking that I am going to put flame arrestors on anyway soon and rejet to your specs anyway Bill. That is if I can stop riding it for a weekend to do it!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Where is the post on how to tweak your prop
    By surferd15 in forum 2-Stroke Performance
    Replies: 4
    Last Post: 11-10-2011, 12:56 PM
  2. What's and where is the tcp on a 03 f12x
    By MTD01 in forum Honda How To & FAQs
    Replies: 2
    Last Post: 09-11-2008, 08:46 PM
  3. Where is the oil bleed screw in a Yamaha XLT 1200 WaveRunner
    By mmr11408 in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 06-07-2008, 01:32 PM
  4. Where is the thread on how to fill the ride plate holes?
    By EAG8999 in forum 4-Tec Performance
    Replies: 1
    Last Post: 05-21-2008, 01:59 PM
  5. Where Is The Exhaust Drain Tube On 06 Sportster 4-Tec 155HP?
    By holdnon72 in forum Sea Doo Sport Boats
    Replies: 0
    Last Post: 07-15-2007, 09:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •