Thread: R+D Nozzle from a fzr to gpr?
08-06-2012, 09:45 PM #1
R+D Nozzle from a fzr to gpr?
I got a r+d nozzle off a fzr from a guy who said it would fit my gpr. Lokk at this pic and tell me its alright. The two black bolts onthe sides cannot be tightened due to the gap from the trim ring to the nozzle. Its hard to see but its about1-2mm. It just dosent seem right to me but I have nothing to compare it to. I feel like the bolts are going to back out. I guess i could use some washers but not really wanting to rig some crap up, Id rather have the correct part.
08-06-2012, 10:31 PM #2
the FZ turn and exit nozzles will interchange with the GPR
the R&D nozzles are usually a little sloppy tho... usually do have to shim them a bit
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)