Results 1 to 7 of 7
  1. #1

    951 Jugs get stuck half way up studs when removing ???

    97.5 White motor getting real stuck on studs pistons are free moving it evenly as posibe?????? Leftover locktite or some thing. Feel pretty dumb at this point.


  2. #2
    flyin' the friendly skies airbornexp's Avatar
    Join Date
    Aug 2007
    Location
    Mahomet, Il. USA
    Posts
    6,004
    +1
    163
    Quote Originally Posted by 153stars View Post
    97.5 White motor getting real stuck on studs pistons are free moving it evenly as posibe?????? Leftover locktite or some thing. Feel pretty dumb at this point.
    there are little rubber orings on the stud bolts i believe...that is most likely your problem

  3. #3
    SURFnTURF's Avatar
    Join Date
    May 2007
    Location
    Australia
    Posts
    878
    +1
    11
    Take the studs out by using two head nuts back to back or spray heaps of WD40 down the studs and turn the crank until both pistons are level ans start working it up and down until they come to the top and lever them out with a small tool

  4. #4
    I made a pair of reverse clamp/ spreader with 2 plates rubber and some all thread . Was easy as pie after that , yes O-rings were culprit.
    I'll put them with my cut and welded at 45 wrench for 951 exhaust

  5. #5

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    If you thought that made the job easy, you will be AMAZED to see how easy taking the cylinder off is when your remove the studs 1st

  6. #6
    It didn't want to go down either . The spreaders were a government job at work.

  7. #7

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    double nut the stud and use a little heat where the stud threads into the case.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. annoying songs that get stuck in your head.
    By MikeTrin in forum Open Discussion
    Replies: 51
    Last Post: 04-22-2009, 09:53 PM
  2. 951 wont get over 2000 rpms
    By Joe Stang in forum 2-Stroke Performance
    Replies: 19
    Last Post: 10-01-2008, 06:10 PM
  3. Once a stick gets stuck in your prop what to do?
    By twinturbostang in forum 4-Tec Performance
    Replies: 9
    Last Post: 06-15-2008, 08:18 PM
  4. Lake of the Ozarks - Dicks Half Way Inn at night.
    By MikeTrin in forum Videos & Pictures
    Replies: 14
    Last Post: 09-16-2007, 08:39 PM
  5. I need to get my RPM's up-Any ideas.
    By Mongoose in forum Yamaha Old School Skis
    Replies: 28
    Last Post: 04-27-2007, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •