Thread: It's alive! first gprxp project
08-07-2012, 10:08 PM #1
It's alive! first gprxp project
With loads of help from reading others build threads on forums and pictures, just brought the conversion ski to life! The water isn't hooked up yet and neither is the external cooler ( or supercharger piping ) but it has burbled to life and I'm pretty excited about it.
How are you guys hooking up the speedometer/sensor or at you just living with it setting 1511 code?
Last edited by Avi8tor; 08-25-2012 at 03:54 PM.
08-07-2012, 10:18 PM #2
08-08-2012, 02:43 AM #3
- Join Date
- May 2007
- Auckland, New Zealand, New Zealand
08-08-2012, 05:00 AM #4
Throw it in the front bucket to monitor your beverage temps.
08-08-2012, 06:50 AM #5
Just another sensor I need to buy. This project requires 1 200.00 part for every hour I work on it ( sensors , injectors etc missing) haha it makes more $$ than I do.
08-08-2012, 06:53 AM #6
08-08-2012, 07:04 AM #7
08-08-2012, 08:15 AM #8
08-08-2012, 08:29 AM #9
candoo nor the cluster monitors oil pressure its just a switch. But you can add a gauge there is a 1/8npt port on the head next to the temp sensor.
08-10-2012, 03:59 PM #10
Waterrouting question.... Please take this picture " right click and save picture" then open with "paint" and draw in the routing for yamaha pump and riva open loop?
Dark blue for inlet water and red lines for water exiting would be great
I have 2 water pressure water inlets and 1 outlet in the pump and 4 pissers ( 2 factory, 2 dumps out rear) and 1 hole where the speedo used to enter
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)