08-12-2012, 12:03 PM #1
anybody ever had this problem with the turbotech fuel rail
a few weeks ago my engine died during aa cc race. when i took the seat off there was a nasty smell of fuel so i desided to put the key on de dess post to see where the fuel was leaking and it came out of the hole where the injector sit in the fuel rail. i saw that the o-ring was pushed down over the injector and didn't seal the gap anymore. i changed all the o-rings of my injectors and thought that was good. today when i'm riding it happened again.
has anybody had this problem with the turbotech fuel rail???????
08-12-2012, 12:16 PM #2
Looks like you need to lower the fuel rail to engage the injector more,
08-12-2012, 01:05 PM #3
oke, thanks for your quick reply. i will lower the fuel rail more.
08-13-2012, 06:32 AM #4
When I installed my turbotech rail I noticed the o rings were visible.
I machined about 2mm off the rail where the bracket attaches to lower the rail. The o rings sit up inside the rail and are not visible at all.
08-13-2012, 06:43 AM #5
- Join Date
- May 2007
- Auckland, New Zealand, New Zealand
08-13-2012, 07:09 AM #6
yeah, i had that issue too. I believe I bent the bracket back to make it work.
08-13-2012, 07:10 AM #7
08-13-2012, 07:25 AM #8
Common ... Bracket is too weak ...
08-13-2012, 01:42 PM #9
08-13-2012, 03:51 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)