Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    Join Date
    Apr 2008
    Location
    Alabaster, Alabama
    Posts
    66

    07 250x not powering up

    Ok so i was riding my ski yesterday and was running great. Pulled to the dock to chat with a friend and shut the ski off, the conversation was short enough that the ski still had power to the multi function meter, so i hit the start button. Engine turned over 3 times and then it lost all power, no display, push the FPO key in and nothing must a click at the ECU relay. Got towed back to the trailer and started checking the battery, connectors, fuses, and anything else I can think of, also tried the SLO key and nothing.

    Specs on ski:
    07 250x, 75hrs, all service, which is mainly oil changes and winterization, has been handled by a reputable dealer locally.


    Any thoughts as to what I need to look at. I have a sevice manual and could not find anything even close to the problem.


  2. #2
    UltraKvz's Avatar
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    378
    +1
    23
    Besides the obvious, check to see if you did'nt suck something up that tangled in your pump or shaft.

  3. #3
    That doesn't explain why there is no electric power to the display.

  4. #4
    UltraKvz's Avatar
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    378
    +1
    23
    Yep, missed it.

    Quote Originally Posted by meangreenman View Post
    That doesn't explain why there is no electric power to the display.

  5. #5
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    umm flat battery!! or blown fuse..

  6. #6

    Join Date
    Apr 2008
    Location
    Alabaster, Alabama
    Posts
    66
    Batterey is good, 13.5 volts and less than a year old and the only two fuses i have found are both good, checked them with multi-meter.

  7. #7

    Join Date
    Apr 2008
    Location
    Alabaster, Alabama
    Posts
    66
    Thanks for the replies guys keep the suggestions coming, engine ground is good clean and intact.

  8. #8
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    check the key reader wire plug connector near the ecu, sounds like a faulty key reader

  9. #9

    Join Date
    Apr 2008
    Location
    Alabaster, Alabama
    Posts
    66
    Will do Nic, have to check tomorrow, too many blood suckers out there right now.

  10. #10

    Join Date
    Apr 2008
    Location
    Alabaster, Alabama
    Posts
    66
    Load tested the battery and it passed. Are there any other fuses that the service manual does not list, I have only found the 2 main ones next to the ECU?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2011 Seadoo GTS 130 4-tec not powering up! Nothing
    By KwAJ305 in forum 4-Tec Performance
    Replies: 46
    Last Post: 10-09-2017, 08:06 AM
  2. 07 250x.....low power
    By Outkast187 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 1
    Last Post: 09-06-2015, 11:14 AM
  3. Seadoo not powering up
    By synergy141 in forum 4-Tec Performance
    Replies: 23
    Last Post: 04-30-2015, 07:44 AM
  4. 2006 RXP, will not power up, no beeps, no lcd display
    By endeavor_635650 in forum 4-Tec Performance
    Replies: 10
    Last Post: 09-17-2014, 10:09 AM
  5. 2005 RXT will not power up.
    By g8trman in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 07-08-2013, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •