Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 36
  1. #1

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213

    Lightbulb Strongest Nozzle Splash Rxp 2006

    Hi Guys

    I Like To Play With My Friends By Splash Them

    From The Back Of My Rxp Nozzle , Can Any One Tell

    Me To Improve That , To Make The Splash Much

    Stronger Or The Strongest Splash Ever Seen From

    Any Jet Ski's , Please Advice Me As I Have Ordered The

    Stage One , But What About Changing The Rear Nozzle

    I Don't Care About The Reverse I Can Cancel It If It's

    Going To Make Better Or Strong Splash , Please Tell

    What Part Do I Need To Get Included Every Things Needs

    To Complete The Kit ,,,,,,,,,,,thanx


  2. #2
    Been around for years...seen it all Kawi-Guy's Avatar
    Join Date
    Oct 2006
    Location
    Naples Florida
    Posts
    828
    +1
    27
    Did you check with your parents first to see if this would be OK to do?

  3. #3

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by Kawi-Guy View Post
    Did you check with your parents first to see if this would be OK to do?
    YES SURE , IF IT WORKS , WHEN I CHANGE THE REAR NOZZLE

    TO BETTER ONE, THEN I THINK WE WILL GET ALLOT OF ORDER

    FROM MY BEST WEBSITE WWW.4-TECPERFROMANCE.COM

    MOST OF MY FRIENDS HAVE RXP 2005-2007 .

    PLEASE I NEED HELP,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,

    I M VERY VERY INTERSTING TO MAKE THE STRONGEST SPLASH

    FROM MY RXP 2006 WITH OUT EFFECTING MY ENGINE

  4. #4
    HOSS's Avatar
    Join Date
    Aug 2005
    Location
    Kenner, LA
    Posts
    4,763
    +1
    29

    Thumbs up

    You must meen the rooster tail! Get the 2.5 degree wedge then,,or double up the 2 degree wedges,,then you`ll hose them right off their seats.

  5. #5
    ou812's Avatar
    Join Date
    Jun 2006
    Location
    Riverside,ca
    Posts
    6,210
    +1
    198
    Quote Originally Posted by HOSS View Post
    You must meen the rooster tail! Get the 2.5 degree wedge then,,or double up the 2 degree wedges,,then you`ll hose them right off their seats.
    add an 81mm nozzle for thrust

  6. #6

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by HOSS View Post
    You must meen the rooster tail! Get the 2.5 degree wedge then,,or double up the 2 degree wedges,,then you`ll hose them right off their seats.
    OOH , THANX FOR THAT , BUT WHAT DO U MEAN 2.5 DEGREE WEDGE

    AS I GOT THE RIVA PUMP WEDGE IN THE STAGE ONE KIT ,

    SORRY ABOUT THAT , BUT REALLY I DON'T HAVE ANY EXPERIENCE

    IN CHANGING ANY STOCK PART TO AFTER MARKET PART , BUT

    I M REALLY LEARING ALLOT IN THIS DAYS FROM THE LOVELY

    GREE HULK PERFORMANCE FOURM ,,,,,,,PLEASE REPLY

    ABOUT THE INFO ABOVE AND CONFIRM ,,,,,,,,,THANX

  7. #7
    Moderator The Bandit's Avatar
    Join Date
    Jul 2006
    Location
    Wilmette, IL
    Posts
    8,373
    Tap a 1/2 NPT hole in the venturi. then run a 1/2 diameter braided steel hose from that about 6 feet or so to the bottom/feed of a super soaker squirt gun. Without needing to pump it, you can mount it on a swivel on the rear grab bar. NOW, while riding you should have a gun facing the rear of the ski, that swivels 180 degrees. Based on the speed you are riding, you should be able to squirt about 60 to 80 yards away. This should have enough force to either blow them off of there skis, or at least knock an eye out......hope this helps

  8. #8

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by RXP Steve View Post
    Tap a 1/2 NPT hole in the venturi. then run a 1/2 diameter braided steel hose from that about 6 feet or so to the bottom/feed of a super soaker squirt gun. Without needing to pump it, you can mount it on a swivel on the rear grab bar. NOW, while riding you should have a gun facing the rear of the ski, that swivels 180 degrees. Based on the speed you are riding, you should be able to squirt about 60 to 80 yards away. This should have enough force to either blow them off of there skis, or at least knock an eye out......hope this helps
    WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW

    THANX THANX THANX THANX , I WILL DO IT , THEN I WILL SEE

    WHAT WOULD HAPPEN TO MY CRAZY FRIENDS AAAAAAAAH

    BEST REAGRDS

  9. #9
    Gotta love this sport! 05Limited's Avatar
    Join Date
    Apr 2005
    Location
    Stockton, CA
    Posts
    2,677
    +1
    4

  10. #10
    Quote Originally Posted by RXP Steve View Post
    Tap a 1/2 NPT hole in the venturi. then run a 1/2 diameter braided steel hose from that about 6 feet or so to the bottom/feed of a super soaker squirt gun. Without needing to pump it, you can mount it on a swivel on the rear grab bar. NOW, while riding you should have a gun facing the rear of the ski, that swivels 180 degrees. Based on the speed you are riding, you should be able to squirt about 60 to 80 yards away. This should have enough force to either blow them off of there skis, or at least knock an eye out......hope this helps

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB factory Nozzle rxt , rxp
    By ipantoja2001 in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 08-26-2008, 08:23 PM
  2. F/S Riva Pro Series reduction nozzle for RXP
    By bankyf in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 07-29-2008, 11:46 AM
  3. Boost Pressure Gage RXP 2006
    By qatar2000kk in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-11-2008, 02:45 AM
  4. help help with my rxp 2006
    By dxb555 in forum 4-Tec Performance
    Replies: 5
    Last Post: 11-21-2007, 03:48 PM
  5. Ceramic Hybrid sc , RXP 2006
    By LAB69 in forum 4-Tec Performance
    Replies: 2
    Last Post: 02-01-2007, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •