Thread: i want to check sc slip
08-15-2012, 03:36 AM #1
i want to check sc slip
I am going for a rebuild anyway but noticed smt on my sc. When i use alot of pressure with my fingers, i can move the sc from 12 o clock to almost 2 o clock before it stops. But this is happening only when i use all the pressure i can with my fingers. I have metal washers and would like to ask if this is normal.
Thanks in advance,
08-15-2012, 08:27 AM #2
08-15-2012, 08:43 AM #3
Yes this is a tiny bit more than normal but ok on a stock 215 hp Scer..any more then i would consider pulling and rebuilding/resetting the slip..
08-15-2012, 08:48 AM #4
IMO, I would check it using the cam locking tool, proper torque wrench and check the slip while SC installed in the engine. Otherwise pull the SC and bench check it.
08-15-2012, 09:12 AM #5
actually is a stock housing modified to accept an x charger. I dont know if this makes a difference but anyhow i will ride it for 5 hours more and then go for a rebuild
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)