08-20-2012, 06:02 AM #1
Engine hydro lock.coolant leak into engine
after 20min ride engine hydro lock,found milky oil & coolant bottle was empty.
This was third time change my oil cooler..anyway to prevent coolant leak into engine?
Any better quality oil cooler design or by pass it?
Just change my New Bellow bearing,will this affected?
08-20-2012, 06:21 AM #2
What mods on the machine, is it stock? No, don't bypass the oil cooler! If it truly hydrolocked you'll be building an engine soon. Did you get an OH alarm at any time? More info needed.
08-20-2012, 06:41 AM #3
Are you sure its the oil cooler? And not the head gasket?
08-20-2012, 07:11 AM #4
Re: Engine hydro lock.coolant leak into engine
Check your IC To.
08-20-2012, 07:13 AM #5
08-20-2012, 08:09 AM #6
Engine only use about 10hours after rebuilt.No Alarm at all,it's just die on open sea.
Confirm hydrolocked.Milky oil,third hole(near SC)New plug tip broken....
just change New oil,plug,oil Filter,Bellow Bearing,Thermostat before riding...
Will remove the IC & oil cooler to check it out...
08-20-2012, 08:17 AM #7
check your rods...most likely bent one.
08-20-2012, 09:16 AM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)