Thread: Novi questions for single pipe.
02-04-2007, 11:24 AM #1
Novi questions for single pipe.
Aynone run Novi 48s on there singlepipe? Looking for suggestions on
jetting. I know the jetting for tripples but singles usually require less
02-04-2007, 11:38 AM #2
02-04-2007, 12:05 PM #3
I am running the novi 48 carbs with single pipe.This setup is a little rich for my ski .I started with 150 main and worked down.
02-04-2007, 12:12 PM #4
02-04-2007, 12:56 PM #5
Just watch yourself with the NOVI carbs, they are amazing all around the warning comes in with the jetting. It seems that from our expierence and talking with others that with similar setups the jettings can be VERY DIFFERENT from ski to ski. You have to experiment but onces there dialed in HOLD ON!
02-04-2007, 03:21 PM #6
02-05-2007, 08:13 AM #7
jetting will also vary depending on
-who does the porting (Lowell's motors tend to want a lot of fuel)
- whether cases are ported (typically wants more fuel)
- whether there is a window in the piston (typically wants more fuel)
Fuel pressure also has an effect on the jetting used. If you run higher fuel pressure you will flow more fuel. So to compare jetting you also have to compare fuel pressure.
Last edited by philip_gpr; 02-05-2007 at 08:17 AM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SJ-(KY) in forum Yamaha 2 Stroke SkisReplies: 4Last Post: 12-17-2012, 08:38 PM
By jalopski in forum Sea Doo ClassifiedsReplies: 31Last Post: 02-25-2009, 10:59 AM
By sbogi in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 01-21-2008, 12:18 AM
By Therock in forum 4-Tec PerformanceReplies: 9Last Post: 05-25-2005, 05:11 PM
By Therock in forum 4-Tec PerformanceReplies: 3Last Post: 05-20-2005, 07:13 AM