Thread: 93 750 Parts
08-28-2012, 10:28 PM #1
93 750 Parts
I tore down this motor for the stator and a couple of other parts for another member, and figured I might as well post the rest of the stuff instead of putting it back on the shelf. I just pulled the jugs and pistons and was really surprised how good everything looked. This motor was in a ski that the guy "just couldn't figure out..." From the wash on the pistons, I figure he had some fuel and tuning issues. The heads were marked, so I know they were off at one time, so I know he was in there. The jugs and pistons were carefully removed and the wrist pin, needle bearings and clips were put back in after I pulled them. As far as the bottom end goes, I don't think there is anything wrong with this crank. Crankcase has oil in it, and everything moves good, but tight. After looking at the ports, it looks like the previous owner took on some sand. Well...no...he DID take on some sand, because the cooling intake is full of it. Yet I babble on. Here are the pictures:
Based on what I've seen, I think I'm safe at around $150 for the set of jugs and $75 for the crank (+ shipping, of course). Any takers, let me know. Thanks!
08-29-2012, 12:42 AM #2
If I dive into mine in a month and find out I need a crank I'm going to be PISSED that you had a good one for $75. Great prices, I'm sure those are gunna sell quick.
08-29-2012, 01:05 AM #3
08-29-2012, 02:14 AM #4
09-07-2012, 08:41 PM #5
So how much for the crank shipped to 72635? Thanks.
09-07-2012, 11:36 PM #6
Price up above is $75. Crank is still in the bottom end. Let me know if you want it pulled and shipped separately, or the whole thing. I'll weigh it and calculate shipping from there.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)