09-01-2012, 11:20 PM #1
TDR Waterbox - WORX WR229 RXP-X Intake Grate - Piranha Thru Hull Exhaust Tube
Hey all, just noticed I posted my other for sale in the wrong forum...so here it is in the correct one. Also modified shipping because I'm realizing the shipping is unpredictable.
I have the following for sale, all parts are in great shape.
- TDR Waterbox Part# 02-0084 (for RXT, RXT-X, RXP, RXP-X, GTX, GTI) is like new (used in FRESH water only). This box can be used in conjunction with the stock exhaust outlet or the Piranha thru hull (which I have for sale below), this also allows you to keep your OPAS. - PRICE: $220 + SHIPPING
- Piranha Thru Hull Exhaust Tube. Like new, obviously. It's silicone. Clearly there is exhaust residue on the inside, but tube is like new on outside. PRICE: $210 + SHIPPING
-WORX RXP-X / RXT-X Intake Grate WR229: Fairly decent condition. I wound up with two of these as I accidentally ordered one from DennisKirk. This one is used and was bot off this forum. In great shape and is straight (ie, not bent). PRICE: $140 + SHIPPING (SOLD)
If some of my prices are too high feel free to shoot me an offer.
Last edited by RobWCanada; 09-12-2012 at 10:19 PM.
09-10-2012, 09:44 PM #2
09-12-2012, 09:57 PM #3
Does the water box fit the 07 models?
09-12-2012, 10:17 PM #4
09-12-2012, 11:39 PM #5
09-13-2012, 12:29 PM #6
you could use it on an 07 and older as long as you converted everything on the exhaust right after the manifold to 08+ spec mid pipe mainly
09-15-2012, 04:04 PM #7
09-24-2012, 11:11 AM #8
09-28-2012, 02:15 AM #9
can you use the tdr box and riva rear exit? i see in his store there is a rear exit specific p/n, but idk
09-28-2012, 08:52 AM #10
The box I'm selling is designed to be used either
a) with the stock exhaust outlet. ie. you just take out your other waterbox and pop this one in it's place and attach the stock exhaust hose to it.
b) you get my box AND the Piranha exhaust hose and you can use the RIVA exit with my box because the Piranha hose will be flexible enough to make that adjustment without any problems. Piranha hose is VERY forgiving if you wind up with the hole in the wrong spot. However, if you are lucky you can install this without even removing OPAS. Which is what I did. There is practically no room for error here, like 1/4" off MAX, and it wont work. I had a ruler inside the hull measuring stuff.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)