Results 1 to 5 of 5
  1. #1
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474

    Seadoo 4 tec dash , has any one split one apart ?

    Has anyone split the dash , some off my gauges arnt working right ...

    But after some time in the sun the display comes back ... Sounds like some moisture has got in and causing a bad contact ...

    Its on a RXT X 255 ...


  2. #2
    rxp steve
    Join Date
    Jul 2010
    Location
    Jacksonville,Fla.
    Posts
    64
    +1
    6
    SLASHER, I just went thru the gauges on both my ski's. When I took my gauge out and tilted it a little forward I had about 8 or 10 table spoons of water in them. I drilled a hole on both sides where the besel clips on and used a little air pressure to blow the water out, but after a few days the gauges looked like blue ink had been spilled on them. I think it was from using the air pressure. If I had to do it again I would drill a hole in the middle of the gauge on the back where it leans back as it sits mounted. To let the water seep out.I split one of my gauges open but didn't get any pictures. You would have to be careful about your drill depth. I have the other gauge I can split to post pictures of. I believe if you can get a way to let the water drain out the gauges, they would be fine even if they leak thru the lens. Its the water build up that kills them. At about $550 a ski for new ones there should be some kind of fix.

  3. #3

    Join Date
    May 2005
    Location
    Minneapolis
    Posts
    763
    +1
    26
    SOmeone has done it and repaired it - I think from Australia - it is on this site somewhere

  4. #4
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    I can't see water in there , but I have lost fuel level ... It's getting warmer here and the fuel level bars seems to be coming back ... I notice there is a one way valve at the back , I may leave it out in the sun to see if this helps ...

    Dam dash arnt cheap , so yes there must be a fix .... I wounder who here (Australia) has fixed these gauges ?

    Thanks guys for your help ...

  5. #5

    Join Date
    Aug 2012
    Location
    miami
    Posts
    62
    you should try some other way to dry it because too much sun its bad for the ink in it and the numbers start fading ..happened to me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 13
    Last Post: 08-14-2013, 08:47 AM
  2. Has any one had any problems with the RXT IS
    By jumbojet in forum 4-Tec Performance
    Replies: 18
    Last Post: 05-01-2010, 08:12 AM
  3. Has any one used a Skat 17/28?
    By cigarlust in forum Honda Performance
    Replies: 1
    Last Post: 12-13-2008, 05:56 PM
  4. Has any one tried this?
    By miamirider in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-26-2007, 01:08 AM
  5. Has any one ever used a tming advance for a kawi 750??
    By wolfman05 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 4
    Last Post: 11-15-2006, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •