Results 1 to 6 of 6
  1. #1

    Join Date
    May 2010
    Location
    Savannah, GA
    Posts
    157
    +1
    1

    96 GSX wear ring let go today.

    My wear ring let go today black plastice everywhere. I have it off the ski but I have a few questions.
    1. do I need to get a pump rebuild kit?
    2. should I replace the prob see picture.
    3. since all is apart is there anything else I should replace?
    4. What type of locetite do I need to put everything back togather.
    5. what type of oil goes back in the crone?


    Thanks,
    Baron
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2012-09-16_14-40-19_331.jpg 
Views:	91 
Size:	42.9 KB 
ID:	283305  
    Last edited by barondurden; 09-16-2012 at 06:27 PM.


  2. #2

    Join Date
    Aug 2012
    Location
    Pennsylvania
    Posts
    17
    I just had this happen and I took a flat head screw drive and worked around the wear ring until it slid out and slid a new one in so I didn't have to deal with the rest of the pump. There is a post on here about replacing the wear rings without taking the pump apart and they say to put it in the freezer since the wearing will shrink faster than the pump and make it easier. My ring came out easy enough so I didn't have to do that.

  3. #3

    Join Date
    May 2010
    Location
    Savannah, GA
    Posts
    157
    +1
    1
    I will try that. I have already pull the cone so anyone know what type of oil goes back in it

  4. #4

    Join Date
    Aug 2012
    Location
    Pennsylvania
    Posts
    17
    Seadoo jet pump oil. A synthetic gear oil should also work, Mobile 1 makes a 75w-90 synthetic gear oil.

  5. #5
    roundtopjeff's Avatar
    Join Date
    Aug 2011
    Location
    Clarkston Michigan
    Posts
    64
    +1
    1
    +1 on the jet pump oil..very pricey though

  6. #6

    Join Date
    May 2010
    Location
    Savannah, GA
    Posts
    157
    +1
    1
    Np i already have that type of oil on hand. Lucky me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. supercharger shaft let go today...
    By Doug78 in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 08-19-2012, 04:31 PM
  2. 96 SPX Wear ring
    By IN96XP in forum 2-Stroke Performance
    Replies: 2
    Last Post: 09-13-2009, 10:12 PM
  3. Can't get wear ring to go into pump
    By Foggy in forum 4-Tec Performance
    Replies: 58
    Last Post: 05-20-2009, 06:41 PM
  4. Need to change out Wear Ring TODAY
    By sr71bb in forum 4-Tec Performance
    Replies: 9
    Last Post: 07-24-2006, 06:18 AM
  5. Those Going to MUDBUG:: In Need of RXP Wear Ring.....!!!!!
    By VFX_Artist in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 06-07-2006, 07:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •