Thread: skat 15/19
02-08-2007, 07:38 PM #1
a friend is bringing me a skat 15/19r tomorrow to put on my stage II Rxp. should pitch the prop or run it first see what happens. who's running this prop & mod combo???
02-08-2007, 07:47 PM #2
Im interested also..Im putting a stage 2 RXP together also and am debating on which impeller to use.rivas 3 blade or solas 4 blade...
02-08-2007, 09:48 PM #3
I am doing the same..
Anybody got any info on the pitch?
02-08-2007, 10:44 PM #4
Start with - 1 mm on the trailing edge
02-09-2007, 08:07 AM #5
Read something you need to file the edges too?? Jerry what Mph did you see with this prop on a stage II?
02-09-2007, 09:36 AM #6
When you play with the trailing edge it might not fit back into the wear ring. Just simply file it down until it fits.
This prop wasn't available back when i had a stage 2 so i can't answer that. I do know that i went from 79.8 on Careys ski with a 15/20 - 2mm to 81.5 just from bolting on a 15/19R prop.
02-09-2007, 10:40 AM #7
02-09-2007, 11:50 AM #8
Boosted, what is your baseline now? Are you running the 15/20 4 blade? What speed and rpms? I will be playing with props this spring too, looking at the 15/19 3 blade as well, interested in your results ...
02-09-2007, 12:22 PM #9
After I install this RR IC today my ski will be a complete stage 2 & I'm thinking I'll have to add pitch to my 13/18 3 blade. It was hitting 8160 rpm in cool weather & water last week so i'm assuming it will be all over the limiter but how will it pan out in the summer?
Maybe 13.5/18.5 or 14/19?
Jerry, what would adding 1mm do on a 13/18 swirl with my "new" setup?
02-09-2007, 12:24 PM #10
Im running that prop Now ... However the water is like an ice rink here ... 3 more mos before I know my gains
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mark S in forum 4-Tec PerformanceReplies: 13Last Post: 07-04-2005, 08:09 PM
By Enufpwr in forum 4-Tec PerformanceReplies: 11Last Post: 06-29-2005, 08:11 PM
By nitro rxp in forum 4-Tec PerformanceReplies: 6Last Post: 06-04-2005, 09:00 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 17Last Post: 05-22-2005, 07:39 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 34Last Post: 05-12-2005, 08:56 PM